Cubierta negra Luz resistente al agua 3L

SIZE 3L purchased
400X with OEMRear Carrier (NC56) Attached to
Just fit!

[How is it used?
It is outdoors to the extent that it blows in a little.
Was the one you received as per Image?
I think it is as shown in the product photo.
How was your experience with it?
The rear tire is not hidden as shown in the product photo, but it can be hidden if you use your own belts and tie them in an ingenious way.
[Points to note]
I did not put on the Heat Seat because I do not put on the Seat until the Exhaust System etc. cools down.
How did it compare to other products?
The lack of a large open zipper reduces the risk of flooding.
If you want to cover Motorcycle well, you may want to have a Belt of about 2M, which is sold at a homespun store or the like.

[How is it used?
I'm using it on my MainMotorcycle XJR1300C, and I'd say the 3L size is about right or a little large.
I chose this size because the normal XJR1300 is 3L size and the old model Black coverStandard was also 3L.
The bicycles are stored in a covered outdoor bicycle parking lot.

Was the one you received as per Image?
I thought the fabric would be thin because it was labeled WRLight. I was expecting it to be thin.
Like the old MODEL, it has a 300 denier thickness, which gives it a solid texture.
In addition, the lining of the old MODEL was White, but the WRLight of the New Model has become Black, and it is a good feeling to increase the feeling of Black further.

How was your experience with it?
The feel of the product is as good as ever, and the front and rear locking holes are divided into Yellow and Red colors.
It is very easy to know which side is the front when you put it on. Also, the drawstring hem is very convenient.
And it's a good point that it has Velcro to hold it together.
In addition, the old model had a separate buckle belt to prevent flapping around the body, and it was necessary to thread a string through it every time.
The new MODEL is sewn into the Cover, and now that it's one piece, there's no hassle here!

[Points to note]
There is nothing special about it, but it is thick to some extent, but if the exhaust system is hot, it will melt, so be careful.

How did it compare to other products?
I really like the black color. The silver color really stands out.
Black is so blinding in the daytime and at night, I'd rather not have it there in the first place!
I can recommend it to anyone who is looking for a good quality product. The quality is also a DAYTONA product, so you can be sure of that.
There are many inexpensive covers available, but in the end, the most satisfying black cover is made by DAYTONA.

Because the price of the cover of the heavy waterproof is more than double than the one of the LightWaterproof of this product, I was not sure, but

The day after the rain is what this state is in the picture.

I usually use a cover with a rear box, so if you apply it carelessly, the center of the cover will be dented (if you apply it properly, it will be Large and strong).

I was surprised. There was a pool of rainwater. It didn't penetrate at all and didn't seep into the Motorcycle.

It's perfect because it saves me the hassle of always having to rag it before riding it, and best of all, it keeps my Side Back dry!

I've experienced rain many times since I bought it, but it doesn't bleed - even if it's not the most expensive DAYTONA Waterproof!

And I did not notice, but String that can squeeze the bottom side, I was hanging on the ground like the previous Cover, but when wet and soggy, I think I'll put a Clip to hook on top …

And then I looked closer, and there it was!

Here! There's a big difference between having it and not having it.

I'm so glad I took the time to do this.

I think it would be nice if the color stood out a little more (laughs)