DAYTONA

It is not the thing which is troubled by the loss, but I prepared it because it was cut by Rubber deterioration when I blew air.:1 Set of 4pcs. so it is the best choice.

I haven't run my CB1300 for a long time. I thought I should replace the oil just in case and bought it.All the parts that need to be replaced along with the oil change are included, so even a beginner...

Buy it for 2900 yen. 700Point is included. It is the same price as Amazon.Replaced after 2 years and 20,000km. I use it for commuting, touring and mountain passes.CB400SF NC42.Quantity:1 Set for 1 Cal...

This is an excellent performance, a combination of light weight and functionality. They fit perfectly, there were no problems during installation, everything sits tightly and reliably. In operation,...

The design is simple and suits the Tail cowl well. The paint is also black but semi-glossy and not cheap.There were a couple of problems though, the paint on the welds was blistered and rusty and ther...

When replacing the DDR-S100 with the Mivue M770D, the DDR-S100 has a MountQuantity option.:I was using Set and wanted to do a similar installation here so I bought it.Mount of DDR-S100 is Material:I l...

Nowadays, Type that puts it in a special Case for each smartphone is popular, but this model that can be used without preparing several special Cases is Recommendation for the person who has two or mo...

There are high end machines such as B-COM and SENNA, but I think this is enough in terms of function.The price is also cheaper than the expensive ones. But it doesn't mean that it is cheap like the Ch...

The rear blinker of HUSQVARNA was broken, so I chose it as a replacement part.Originally, I prefer to have Blinker and other fixtures Refreshing, but this sometimes looks Refreshing and I am satisfied...

[How is it used?I bought it so I could cover my moped, which I ride about once a week.Was the one you received as per Image?It is a Black Cover as per the Image.How was your experience with it?I think...

The size of the palm of your hand and unexpectedly tiny product.Note that I think it depends on the Size place Caliper in Head.OEM Caliper such as Nisshin should be fine here.It is recommended to purc...

This Plug wrench is essential for motorcycle maintenance and is a must-have when replacing or cleaning Spark plugs. Because there is a firm hold feeling, it can be taken to the Plug hole with peace of...

I bought it to change Oil at home.I know you don't want to add more tools you don't need, but is this a personal must?Thanks to the stretching, bending, and shrinking, it doesn't matter where you use ...

I bought it to convert my Ducati regulator to MOSFET, which is said to be easy to puncture.I didn't want to modify the OEM body side harness, so I used this Coupler.I don't usually use anything other ...

I bought this to clean my RadiatorCore.The Radiator has bugs and tire refuse stuck to it, and there are stains that are difficult to remove with a normal brush, so I chose a cooperative Brass Brush. A...

Hokkaido Touring is being planned. "For God's sake, wear a jacket with a Protector on it. I bought a jacket with Protector for the first time in my 5 years of motorcycle history, and I also bought thi...

I bought this product to attach to my Thailand summer jacket, the Viento Air Jacket. The ProtectorBody can be removed from the Cover, so it is good that you can wash the Cover Only that is dirty with ...

It gets as gutted and wet as driving with bare hands. It makes no sense at all because it soaks in.

I just used it.It was about 12 degrees in the Tohoku region, but my hands were cold.I'm expecting it to be cheap + waterproof so the thermal protection was a bit iffy.It is NAKED without Grip heater.D...

I saw one worn on a DAYTONA Adventure Jacket, so I bought it to try it out. As I thought, it can be used for urbanism and Thailand. Some things need a little sewing, but there is also a problem. The o...

I bought this because my CBR650R doesn't have the OEM Helmet holder.Installation is as simple as removing the Bolt from the Tandem Footpeg, inserting it in between, and then reattaching it!If you have...

Installation is Level, which anyone can do in about 5 minutes.If you are not equipped with anything, there is no problem, but when you remove the Helmet, please be careful because sometimes it is caug...

I bought this for my CT110 HUNTER CUB which has an unfriendly helmet holder.Installation is very easy and takes only 5 minutesSimply remove the OEM Tool Box, cotighten the Bracket, and secure the Hold...

Because our entrance is by the stairs to the second floor and there is room above the head, I installed the Holder there. The wall is a board without strength, so I fixed the vertical board according ...

The best part is that the Dial-style lock doesn't increase the number of keys.I installed it on the thin rubber seat which I bought at the home center just to make sure not to damage the Handlebar Pip...