Road Comet Clear Screen

Ordered the fairing back in October and it arrived in December since it was made to order. The paint match was on point and my bike absolutely looks more classic. People can't believe it's twenty years old either.From a functional standpoint the fairing reduces total wind pressure on my chest. It covers the gauges to reduce sun glare, and it's not noisy. No noticeable reduction in fuel efficiency, and easy to install. I do not drive at unreasonable speed, and would not recommend you do either given that this piece is plastic. Great buy.If there were one improvement to make, it would be to use nylon lock nuts to hold the shield since there is a lot of vibration transmitted through the shield.Overall 5/5 satisfaction with my purchase5/5 aesthetic5/5 accuracy5/5 function4/5 plastic chassis instead of aluminum4/5 hardware for mounting and shield

In contrast to the black metallic car, the paint has too little lame look...
(It contains only 1/3 of the Lame of the actual picture.)

The finish of the reverse side is also made of FRP and has no texture...
（It's very undignified of the vehicle.)

The installation instructions are only attached to a child's drawing level.
Also, there were no detailed instructions and installation was not easy.

In particular, the L-shaped bracket that attaches to the horn is completely different (probably depending on the year), so the purchaser must devise his own way to fix it.
⇒ My vehicle is a 2021 production MODEL.

Also, when the L-shaped bracket is mounted in the center of the vehicle, the hole on the lower side of the cowl is misaligned, making it difficult to match the actual vehicle.

I haven't done any actual driving yet, so I haven't been able to check for resonance, chatter, or windshield effectiveness.

All in all, I'd say.
You should think more about User.

I bought it after seeing the picture after installation on the web, but I am very disappointed.

NAKED runs on a highway, it gets tired from wind pressure and wind noise.
I had attached a Meter visor for the countermeasure, but the wind pressure below the chest was slightly alleviated, but on the contrary I felt that the wind noise was getting bigger.

This time, Road Comet's Aero ScreenSpec. When installed, the wind pressure was reduced, Helmet's wind noise was also slightly reduced.
However, it is not a wake where the wind noise is completely quiet, but the wind is hitting the Helmet.
Since Helmet enters the Area being defended by Cowl if it gives up a little, I think that the effect will change depending on the ingenuity of riding posture.
Paint is beautiful texture, the same color as OEM color Candy Glory red, so the sense of unity is perfect.

At first, I did not like Bikini cowl like Image of a masked wrestler, but now I think that it was good to put on.
If you like Style, you can recommend it.

I attached it to Honda Bros 650, but it is integrated more than I expected, and I am satisfied with the finish as if it was attached as an OEM Product from the beginning. Because it is quite old Motorcycle, I was worried whether the colors would fit, but it was such a condition that I thought that I was stupid.
In the installation, the position of the gold tool at the bottom of Cowl did not match delicately, A little worked and it took less time than I thought. I ordered Large by determination, but it was per Large. Thank you very much.

AeroSpec. Purchase.
Size (height) I did not expect the windshield effect from, and I bought it with consciousness.
Well, after all, 100 km from the expressway / Helmet hits the wind more than I imagined running with h or more. My height 179 cm. If the slope of the windshield is more steep (If the height is about 5 cm after the height) I will continue to think.
Design is also Large Off, but I would like you to consider more practicality than that.

Also, as the speed increases, the whole Cowl vibrates. It is a three point screw stop on the side of the Light and the bottom, so I guess it can not be helped.

A simple Instruction Manual is attached and you can install it in less than an hour if you proceed according to it.
However, the installation position of the screw at the bottom of the Light was slightly misaligned.

I ordered Candy Ali GSX 400 E RED, but the paint color is a satisfying hue.
Most people think that they are not accessories but equipment..

It is also a reason for purchasing that I wanted to install the Cigar socket in a location that is not exposed to rain.
Cigar socket 2 series (New IngDC StationTWINSocket) On the inside Left Side (Drill holes) I installed it.. A triple thing may be impossible.
Right Side has a lot of Harness, so it will be a problem if trouble occurs, so I made it to Left Side.
It will be under the school, so it should not rain while driving.
Quantity : Pair (for Left and Right) I think that it was easier to work if I was about 1 centimeter wider.

It is ★ ★ ★ because the windshield effect is deficient for me.