- I was looking for something with an adjustable angle and came across this Fender lessKit.This was my first time replacing it myself, but I was able to install it without any problems!I tried to instal...Lee mas
- Blinker, reflector, and all other parts can be removed and reassembled to suit your specs!However, it is a bit heavy and the screws are not reliable.Lee mas
- Mounted on z900rs.The price is higher than others, but I would seriously recommend it.The texture is different. Since this is an expensive motorcycle, I think it is right to install a suitable product...Lee mas
- The thick aluminum texture has volume. The angle of the Number can be easily adjusted later.Lee mas
- 做工很好,角度都可以自由调整,牌照无需打孔可以直上,就是国内的黄牌稍微大的一点点但不影响使用。因为下雨天不骑车,也不担心甩泥的问题,反正就是够帅就对了。建议:如果能把安装红色反光块的零件设计的更长一些(大概加长4cm),大小可调范围更大一些就更好了。
----------------------------------------------------------
The workm...Lee mas - Material:It is Aluminum and lightweight. It is nice to be able to change the angle of the Number because of legal regulations. Screw lock was used for mounting each part, but since there is a possibil...Lee mas
- It is a very nice product with good texture and adjustable Number angle and Blinker position.Bullet Terminal processing is required because the product arrives at the Bullet Terminal.The License Plate...Lee mas
- I think it is GOOD Design.Regarding installation, note that the OEM parts are used, although it may not be mentioned in the Instruction Manual.Installation is recommended to prevent the possibility of...Lee mas
- Even the Blinker's appearance was adjustable, and the appearance of Balance and quality was very high ^_^.Lee mas
- The large hole at the opening of the Wiring hole from the outside was filled with Cemedine Pate.As for the wiring of Number etc., I cut the wiring of the OEM License Lamp of the Fender side in the mid...Lee mas
- It is good that the angle of the License Plate and the overhang width of the Blinker can be adjusted.It's aluminum, so it's very lightweight, but you may need to pay attention to the strength.Because ...Lee mas
- It is good that the angle of the License Plate and the overhang width of the Blinker can be adjusted.It's aluminum, so it's very lightweight, but you may need to pay attention to the strength.Because ...Lee mas
- I decided to use SNIPER's Fender Eliminator Kit because the Number angle and Blinker position (width) can be easily changed.The quality is great and the assembly was easy so it didn't take too long to...Lee mas
- Material:It is composed of aluminum parts of Polishing and is cool. 800g weight reduction by Fender Eliminator because OEM Fender is thoughtful.Garbage comes in from there because a hole in the back o...Lee mas
- SNIPER's Fender Eliminator has a very nice texture and allows you to change the angle of the License Plate and the width of the Blinker's overhang. There is no waterproofing of the mouth, so you need ...Lee mas
- TextureThe cleanliness of this cut-out is very nice.It's beautiful.It can be installed nicely without any modification.I would especially recommend it.The number angle can be adjusted widely.The width...Lee mas
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING