- The length is so long that it is kind of unsettling. I feel like it could be 5 cm longer.Lee mas
- I purchased a SUPER SHERPA specific Brake hose for front and rear.Banjo angles are not good, both front and back, like NORMAL.It was impossible to install Hose in Line.One more thing, you can specify ...Lee mas
- In the picture of the purchased item, Quantity:It shows 2 pcs, but when I received it, only 1 pc was included.Please indicate what the enclosed product contains in the product introduction section.Lee mas
- Junction between Banjo adapter and Hose in Aluminum (Taper section) s Torque management was difficult, and although I tightened it up to 8 to 10 Newtons and as the instruction manual states I'm not a ...Lee mas
- I bought it because it is a bit cheaper than SwedgeI do not like the feeling of anxiety and Touch of Aluminum partsIt is necessary and sufficient for normal use, but you will not be choosing again nex...Lee mas
- BALIUS2 (Front) Bolt - on kit for Banjo Adapter, but the shape of Banjo Adapter was different from NORMAL. Although NORMAL has an angle of about 30 ° at both ends, this Kit interferes with others beca...Lee mas
- It attaches with W650.
The product made from an Aluminum should say that rigidity is weaker than iron in the Banjo adapter.
Although the Design is the highest, if a Torque is applied by the Open wre...Lee mas - Although it is a vehicle type design, it is too short and is not generous at all! Three more cm is required.
Pains is taken over attachment although attached. --
Lee mas - Since it was time-tested goods, I thought that it was called this and there was no difference, but there was no design of fitting well individually. Although I think whether to be a handy price, cheap...Lee mas
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING