I used it for RMX 250 S
Response - Power - Fuel consumption
There is no weakness in all, I am satisfied with sufficient performance
I thought I could supply Oil only by replacing Hose, Nipple diameter was different
I wish I could replace it as it was, but there is troublesome, but once you install it is a satisfactory item
Fits: YAMAHA TT250R RAID , YAMAHA TT250R
Purchased a used TT250R RAID carburetor because it was not working properly.
It is lightly pimped out in Kit condition.
As per the Instruction Manual, the Duct (Pig nose) of the Air Cleaner Box should be removed for blowing.
However, the CutterWay is rattling around in the Idling state, and it is very annoying!
I have a PWK28 on a SEROW225 and no unusual noises.
Since Touring is Main, it is painful to listen to the clattering sound for a long time.
Mr. WeBig contacted us to inquire about the Manufacturer. The OEM carburetor is a negative pressure carburetor, so there is no rattling." The ….
Since the OEM of TT250R is also a forced open/close carburetor, my trust in the Manufacturer is also lost at once.
It is not recommended for racing, but too noisy for city driving and touring.View Detail
Fits: YAMAHA TT250R RAID , YAMAHA TT250R
Firstly, when I installed it with a brand-new product, I overflowed, but when I inquired about how to deal with it, the correspondence of Wait Big was satisfactory as soon as possible.
I would like to take this moment to say thank you. Thank you very much.
carburetor is OK with ponding. Setting was also good as it was. I have to overflow ('; Ω; `) ? ? Well, this is.
Because Normal cab was the limitation feeling (Sticking will be severe and Axel will be fully opened) I bought it for the purpose of playing. Torque rises and fuel efficiency gets better (Liter 30) The maximum speed has also increased. The middle to high speed extension is pleasant! Response is also the best! That is, I feel like I became another Engine, there is no sticking.
Up to here is a nice thing (^_^;) The problem is that it will be stalled if you open the Axel quickly at low speed! It will stop when you open it gently, you can not do a Front up of the start (-_-;) , Willy is also extremely difficult, Drift driving is also difficult. Two more times no longer ? ? ? So if you run Touring or Course it may be the best, because it's fast and fuel efficiency is good ? ? However, it is unsuitable for people who use TRIAL, such as Attack type which emphasizes low rotation, even for those who are trying to acquire tech from now on. Accelerated Pump is Large thing so far ('; Ω; `) ? ? ?
Since I have a good fuel economy, I will try to improve NORMAL after using it a bit more or I will save Gold and make it FCR Carburetor Body.
I think Cost performance is good, FCR Carburetor Body is too high ('; Ω; `)
View Detail
Fits: YAMAHA TT250R RAID , YAMAHA TT250R
It is a commodity matching carburetor Body for TT 250 R, but it was used for XT 250 X.
Originally Y30P (There are many diversion information) Although I was thinking about it, the design as a carburetor is also old
FCR Carburetor Body is overkill because it is too high.
Processing the intumani's Rubber about 2 mm Large processing (There is a little impossible with a feeling like screwing in non-machining) ,
The Air cleaner side adjusts the Duct length and tightens it with Band afterwards.
Somewhat, Float chamber interferes with Harness but Limit managed.
You can also use the attached Throttle and Wire (Length is also within the allowable range).
Do not open the cover because the diameter is Large. However, it is stable from Idling with Normal setting. (There is habit when cold)
There is also no sticking. (Throttle heavy)
Emblem is too weak, so we are considering Idol port sealing.
It is going to be set in the direction of thinning as a whole.
Response of forced opening and closing and Torque feeling is addictive.
Since I came up with various settings I will try PowerCheck.View Detail
Fits: YAMAHA TT250R RAID , YAMAHA TT250R
Since pure TK began to have done mischief, it exchanged.MJ of 128 and 125 and SJ of 38 and 35 are contained in the
Kit, and it can tune finely.Are 120 neighborhoods and SJ also a place where 32 neighborhoods are safe in the case
Webike Monitor
Since pure TK began to have done mischief, it exchanged.MJ of 128 and 125 and SJ of 38 and 35 are contained in the
Kit, and it can tune finely.Are 120 neighborhoods and SJ also a place where 32 neighborhoods are safe in the case of the vehicles which are carrying out
resonator withdrawal, as for MJ?Although the
accelerating pump is lost, it is thought that it is easy to issue the part Setting.If it worries with
FCR, the Recommendation of [ here ] will be carried out rightly.View Detail
Fits: YAMAHA TT250R RAID , YAMAHA TT250R
> attachment is easy.Anyone is possible if it is a direction which can remove th
Since the Main nozzle and Needle of the pure carburetor were worn out, it purchased by calling it one Throttle influence and the abbreviation half the price of FCR.
> attachment is easy.Anyone is possible if it is a direction which can remove the
carburetor.deep in case of the Jets which follow by a standard [ for
> ] one in my case -- it loved and carried out.
> -- the accelerating pump of the place which may be compared as it is pure is lost -- it sake, br(s) > becomes easy to treat.Since Aftermarket partses are not only MJ and PJ, a Setting also comes out firmly.
The bad place in particular was not felt.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING