-
opiniones
-
You can install it easily if you do not mind anyth...
Este producto ha sido retirado o actualmente no está disponible.
Poor
You can install it easily if you do not mind anything..The equipped vehicle is XL 1200 X of compatible model.
If you are concerned about small things, you will need considerable processing.
First of all, since the HeadlightBody is removed at the time of Bracket installation, it is necessary to adjust the optical axis after installation.
Since the Rib weld at the bottom of the Bracket hits under stem, the under stem gets scratched.
It was better to shave it if it hit temporarily.
Fitting with Cowl Body is also impossible and Closes Screw while squeezing Cowl inward.
My solid is in a state where precision is bad and Cowl Body is considerably burdened.
The Clearance with Headlight also gets a gap of 1 cm above while the lower side hits Ring.
The Loose hole of CowlBody is wide, and falls in the hole even if it sandwiches Washer in the attached M6.
It was just right width with M8 Bolt.
Because the hole is large and the bracket position is bad, if you tighten Bolt, BushRubber comes out from the Loose hole.
Currently removed, Bracket bending process, Cowl alignment Pate repairing.
Reviews For Current Product From Other Webike User
Very Good
I am coolI tried various studies in Net and searched for the Bikini cowl that meets my taste I made it to Bikini cowl of this Easy riders.
As for installation it is very easy. About 10 minutes or so!
I fixed it a little uneasily structurally, but it is well devised and it is firmly fixed and there is no problem.
I do not feel the windshield effect much, but I am satisfied because the appearance has improved so much.
By the way it was compatible with Xl 1200 X but it was able to be attached to XL 1200 CX without problems.View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING