-
opiniones
-
Good !! In this case it would have been better to ...
Este producto ha sido retirado o actualmente no está disponible.
Excellent
Good !! In this case it would have been better to buy it soonerThe influence of the old law of United States or a lot of Motorcycle is still obliquely cut at the rear end of Tank. For this reason MachineHold may become sweet. I also changed Position and tried to change the sitting position, but the most effective part was this Parts. After installing this, further review of footpeg position improved the sense of unity with Motorcycle and it became easier to handle in Large width. Since Parts itself is Black Gel Coating, it is difficult to paint it (Material : Carbon was happy ...), but the effect obtained far exceeded the difficulty.
Reviews For Current Product From Other Webike User
Excellent
The stability is different.When running Sports, I can hook my inner thigh to the Pad, and the feeling of hold and stability is much better.
I'm worried that I'll have to paint it and that it only installs with double-sided tape.View Detail
Excellent
I feel safe!You can hold your body tightly or use your inner thighs (Large Thighs) in the Circuit I bought it because I wanted to be able to hold and load it (part)
I hope I can practice even harder from this one and update Time ^_^^View Detail
Very Good
CLEVERWOLF Tank PadI installed it in 2010 YZF-R1.
I exchanged from Tank protector by prevention and pretending to ride.
As an impression, the fist 1 pc. I want to sit back in the minute, but the Seat position does not change and it does not change in TankLimit.
While running, the upper body does not move to the front side at the time of Breaking so Approach to Corner improved both lean with and hang off. When Cornering hangs off, the area to hit the thigh has increased, so you can relax your waist with confidence.
Although it is distance to Handlebar, other people say that they will be far, but it is 172 cm tall and Small pattern, but there is room for the elbow to lightly bend. (It is full at full speed when UTurn's Full Stare at low speed. )
As for installation, it is easy to wear if you hit a hit with Masking tape etc. beforehand because it is a one-shot with Double-sided Tape.
As for FPR, the place of the cave pecopeco, but I do not mind while driving and I have not made sense of discomfort for painting, so I have not done it.
I was hoping that the Seat position could be placed behind the bottom but as Seat could not be removed as it came up to Seat, Maintenance got worse so I made it to ★ 4 in total.View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING