100.66 MXN
(920 JPY)
77.68 MXN
(710 JPY)
(23% OFF)
5 (1 opiniones)
rating breakdown
5 Stars |
|
1 |
4 Stars |
|
0 |
3 Stars |
|
0 |
2 Stars |
|
0 |
1 Stars |
|
0 |
Excellent
For the Impact DriverThe Impact Driver from SIGNET, which I purchased recently, uses a thicker bit of 5/16in It's a good and sturdy thing in itself for its intended use, but the size difference between Plus and Minus is Bit is some Quantity:Although it is set, there was no Hexagonal bit (well (I thought I wouldn't use it until Torque) I've licked the Cap bolt on Hexagonal a few times before I thought that Hexagonal was indispensable However, because the Impact Driver is made sturdy after all, Socket is 1/2- it's a thick one with inches That's why I have a 1/4InchBit Adapter for the 3/8Inch socket I have It doesn't work (I have plenty of generic 1/4InchBits on hand.)
So, not knowing anything about tools yet, I thought it was a 1/2Inch socket and 1/4 I thought there was an Adapter to fit the InchBit I thought that there is no Adapter to install InchBit I thought that I should look for the HexaGon bit of 5/16in It is So the only thing I could find was a 1/2Inch socketHead with Hexagonal directly on it It was the Socket bit of this PROXXON which is attached Being to become rather expensive, it does, but if this hits with Impact Driver, even if it hits with Impact Driver, Large sturdy seems to be strong It is so robust In my experience, the most likely to be licked is the M6-M10 Cap bolt, so it is 5,6,8mm I bought a Hex bit of
PROXXON is a manufacturer in Germany, and the quality of these things is The laser marking is beautiful and the size can be identified at a glance Good, when you need to tighten it up with high torque, not just Impact Driver I'm going to use this for things like
Most Viewed Reviews Of PROXXON 1/2 in. Metric Sockets
Excellent
A 30mm Socket that seems to have many uses but few of them[How is it used?
I used it to loosen/tighten the Top cap when Front forkOverhaul on ApriliaRS4 125.
I had 28mm and 32mm on hand, but no 30mm! So I chose the Proxxon, which I have experience using with other Size sockets.
Was the one you received as per Image?
As you can see in the picture. "Thirty. I received a Laser marked Socket of
Matte finish is good because not many other Manufacturer have it.
How was your experience with it?
I was a little worried because the hex of the top cap of RS4 125 is shallow, but I was able to loosen/tighten it without licking.
I'm not sure about the accuracy and quality aspect because of the 30mm and Large fine-grained Size, but it was enough for my needs as I only use it for this work for now.
[Products compared, etc.]
I compared it to KTC and Others toolManufacturer's Socket.
I only used it for this work so it's hard to compare, but as a Sunday mechanic I couldn't really tell the difference.
【Review】
I don't know about the detailed accuracy aspect, but I had no problem using it.
I am satisfied with the price, as it is relatively inexpensive compared to other Manufacturers.
Laser marking in MatteChrome finish is good.View Detail
Excellent
Easy to useI bought it for the MAJESTYS rear tire replacement center nut
Unfortunately, I didn't have a Socket that fit the 24?
I bought it for I think it's nice, stiffness, texture, etc
It is a trustworthy brand and I expect it to be used for a long time
View Detail
Other Reviews From Japanese Webike user
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING