697.62 MXN
(6,376 JPY)
4 (6 opiniones)
rating breakdown
5 Stars |
|
0 |
4 Stars |
|
4 |
3 Stars |
|
0 |
2 Stars |
|
0 |
1 Stars |
|
0 |
Very Good
It was better than I expected.Once I got used to the OEMMeter position on the XSR700, I didn't have a problem with it, but I still think the general position and the same position as the XSR900 would be better … I think it's normal.
There are few documents and reviews, and only the video of foreign countries is there, and it is difficult to do the Right fist at the time of pulling out and inserting the key in the position of Offset, when the key is pulled out and put in and out, it is cheap with the Plate of BlackSteel & hellip; etc... I was anxious, but it was much better than what I thought.
Certainly the space is narrow at the time of key pulling out and inserting, but it is not painful, and it is a better feeling than the OEM position. However, it is thought that it is hard to install Smartphone Holder etc. near the HandlebarCenterMount. The BlackSteel plate is the only one shown in the product introduction image, but the Stainless Steel reverse side plate is included and it is good for the purpose. …Well, the stainless steel plate is much better, and the meter itself is easier to read than the OEM, as it should be. ……This is the normal way to go.
The installation is a simple one, but there is no problem in the handling of MeterWiring, Brake hose, and Accelerator Wire, although the space becomes a little narrow.
The triangle shaped Pipe Bracket, which is one of the most popular products in the market, hides the Aluminum Plate with a tuning fork mark, so this was the right choice.
Reviews For JvB Moto KEDO] Soporte de compensación del velocímetro From Other Webike User
Very Good
The angle is …Styling effect is Outclassing, as many other companies have Pipe type!
However, the angle of the Meter is slightly Up, so the angle needs to be corrected.
The paint on the Edge was peeling in several places, so I thought it might be an overseas manufacturer;View Detail
Very Good
Meter RelocationThis is a recommendation for those who do not feel comfortable with the NORMAL meter position.
Sometimes it's hard to see the LCD in the light.
Helmet Shield. [Color] I could see no problem with Smoke.View Detail
Very Good
Required for Smartphone Mount[How is it used?
This is a must-have Parts to attach the Smartphone Mount to the Handlebar Clamp.
The OEM has a Meter on top of the Handlebar Clamp, so the Meter needs to be relocated.
I can't install it no matter what I do.
Was the one you received as per Image?
It was as shown in the picture, but I had a problem to deal with the excess wiring of the Meter.
Fixed with Tie Wrap for now.
It also had a decorative plate to change the color to Stainless.
Was the installation difficult?
Simply remove the Meter and put it on.
However, please note that the Meter cannot be fixed if the screw of MeterBody becomes stupid.
How was your experience with it?
I'm a little concerned about the accelerator cable sticking, but I generally like it.
[Included Parts:were they on?
I was satisfied because it even included a decorative board.
[Was there anything that disappointed you?
There was a part that was not baked paint, so I painted it with Touch pan.
It's a Bolt hole, so it's basically invisible.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the ManufacturerView Detail
Most Viewed Reviews Of JvB Moto Other Speedometer Options / Repair Parts
Very Good
The angle is …Styling effect is Outclassing, as many other companies have Pipe type!
However, the angle of the Meter is slightly Up, so the angle needs to be corrected.
The paint on the Edge was peeling in several places, so I thought it might be an overseas manufacturer;View Detail
Very Good
Meter RelocationThis is a recommendation for those who do not feel comfortable with the NORMAL meter position.
Sometimes it's hard to see the LCD in the light.
Helmet Shield. [Color] I could see no problem with Smoke.View Detail
Very Good
Required for Smartphone Mount[How is it used?
This is a must-have Parts to attach the Smartphone Mount to the Handlebar Clamp.
The OEM has a Meter on top of the Handlebar Clamp, so the Meter needs to be relocated.
I can't install it no matter what I do.
Was the one you received as per Image?
It was as shown in the picture, but I had a problem to deal with the excess wiring of the Meter.
Fixed with Tie Wrap for now.
It also had a decorative plate to change the color to Stainless.
Was the installation difficult?
Simply remove the Meter and put it on.
However, please note that the Meter cannot be fixed if the screw of MeterBody becomes stupid.
How was your experience with it?
I'm a little concerned about the accelerator cable sticking, but I generally like it.
[Included Parts:were they on?
I was satisfied because it even included a decorative board.
[Was there anything that disappointed you?
There was a part that was not baked paint, so I painted it with Touch pan.
It's a Bolt hole, so it's basically invisible.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the ManufacturerView Detail
Other Reviews From Japanese Webike user
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING