1,098.51 MXN
(10,000 JPY)
893.86 MXN
(8,137 JPY)
(19% OFF)
3 (9 opiniones)
Very Good
Glidden processing is required.I tried the Crimp challenge when I changed the chain, DID's Chain Cut & Crimp tool is a typical player, but it's a little expensive, so I decided to use Daytona's.
Every part is tightly made and there is nothing cheap. The work was also Smooth. I recommend it to the person who is going to try the chain exchange for the first time.
However, the thinnest extrusion pin broke off during the process. This is because the Crimp part was very hard to begin with and I applied undue force to it. You won't have that problem if you skip the head of the Crimp with the Glinerda.
Reviews For DAYTONA Herramienta de corte y remache de cadena From Other Webike User
Average
I've been using it for quite a long time. It's easy to use once you get used to it.I've been using the initial Type for 25 years. I've crimped a double-digit number of Chains with it, with plenty of time to spare.
I've heard that the extrusion pin breaks even on current models, but of course it broke right off on the early ones.
I found out when I was talking to a motorcycle shop about the broken one, that the plunger type is not suitable for cutting.
They don't use it. Even the expensive Professional tool is prone to breaking Plunger, he said.
Use a sander to scrape off the Pin and then extrude it, or use a peel-off cutter if you have the space to work.
That's right
So from now on, after shaving the Crimp with a sander, push it out from the shaved side with a plunger and remove the Plate.
Even a heavy-duty chain can be pushed out with a light force from the shaved side.
By the way, I substituted the broken Plunger with a cut piece of Hexagonal Wrench (lol).
I'm not letting the Crimp use it against me. It's just a stick. But I have plenty of room to use it.
It's like that, so removing the Pin is really light work, and this tool is basically a Crimp job.
The Crimp pin is very durable and hasn't crushed yet.
(It seems that many of the cheap Chinese products that are very similar to DAYTONA have crimped pins that are useless.)
The difficulty of Initial Model is that the screw of Pin push is short and easy to be burned.
However, this has been improved year by year, and it is now possible to turn it with a tool.
It is completely solved in the current product. So basically, there are no drawbacks.
If your pin has a crimp, remove the crimp before removing the pin.View Detail
Terrible
Not at all.This is no good, I wanted to use the thin ones from the Pin Cutter and bought them, but they break easily. Even when I held the hole position firmly in place, it didn't work. In fact, I borrowed a friend's and tried to cut the Chain and it bent. I bought it as a substitute, but it was also bent. It's no good...it's very rare that it's no good for a DAYTONA.View Detail
Poor
I broke itI used it for the 428Chain exchange
According to the Instruction Manual, I tried to remove the chain with the thinner pin
As I squeezed a little more, the Pin started to bend
Use a thicker pin to complete the chain removal
No Plate press fitting problems, it's in Crimp
Isn't this one going to bend? So I crimped a little bit at a time It bent
I carefully tightened and re-tightened the screws, and tried to get out of the way, but the work wasn't going anywhere, so I had to put my fine arm through the wringer The moment you tighten your eyes
The Pin broke vigorously I may have been rough with it I was able to use it many times more safely than the scarecrow that I let rot from poor management
The chain I replaced with this tool only works properly now (I check it often because I'm worried about it.)View Detail
Terrible
This is not it.Almost the same thing to Mono ◯ wax, it is usually sold at 4790 yen and under half price... Those who are considering purchasing will definitely recommend that... Disappointed - - -View Detail
Most Viewed Reviews Of DAYTONA Chains
Average
I've been using it for quite a long time. It's easy to use once you get used to it.I've been using the initial Type for 25 years. I've crimped a double-digit number of Chains with it, with plenty of time to spare.
I've heard that the extrusion pin breaks even on current models, but of course it broke right off on the early ones.
I found out when I was talking to a motorcycle shop about the broken one, that the plunger type is not suitable for cutting.
They don't use it. Even the expensive Professional tool is prone to breaking Plunger, he said.
Use a sander to scrape off the Pin and then extrude it, or use a peel-off cutter if you have the space to work.
That's right
So from now on, after shaving the Crimp with a sander, push it out from the shaved side with a plunger and remove the Plate.
Even a heavy-duty chain can be pushed out with a light force from the shaved side.
By the way, I substituted the broken Plunger with a cut piece of Hexagonal Wrench (lol).
I'm not letting the Crimp use it against me. It's just a stick. But I have plenty of room to use it.
It's like that, so removing the Pin is really light work, and this tool is basically a Crimp job.
The Crimp pin is very durable and hasn't crushed yet.
(It seems that many of the cheap Chinese products that are very similar to DAYTONA have crimped pins that are useless.)
The difficulty of Initial Model is that the screw of Pin push is short and easy to be burned.
However, this has been improved year by year, and it is now possible to turn it with a tool.
It is completely solved in the current product. So basically, there are no drawbacks.
If your pin has a crimp, remove the crimp before removing the pin.View Detail
Terrible
Not at all.This is no good, I wanted to use the thin ones from the Pin Cutter and bought them, but they break easily. Even when I held the hole position firmly in place, it didn't work. In fact, I borrowed a friend's and tried to cut the Chain and it bent. I bought it as a substitute, but it was also bent. It's no good...it's very rare that it's no good for a DAYTONA.View Detail
Poor
I broke itI used it for the 428Chain exchange
According to the Instruction Manual, I tried to remove the chain with the thinner pin
As I squeezed a little more, the Pin started to bend
Use a thicker pin to complete the chain removal
No Plate press fitting problems, it's in Crimp
Isn't this one going to bend? So I crimped a little bit at a time It bent
I carefully tightened and re-tightened the screws, and tried to get out of the way, but the work wasn't going anywhere, so I had to put my fine arm through the wringer The moment you tighten your eyes
The Pin broke vigorously I may have been rough with it I was able to use it many times more safely than the scarecrow that I let rot from poor management
The chain I replaced with this tool only works properly now (I check it often because I'm worried about it.)View Detail
Terrible
Accuracy is too low.After wearing a new item in GSR 750, I checked the degree of Tension at several places by letting Tire circle, the difference between tight spot and loose spot was 2. There was 5 cm.
And it is totally related to Crimp Piece "Goki" There is a Piece caught by Sprocket with the sound.
On the endorsement of the box of items "Non-quality assured goods" There is.
The point is that it is a bad product that entered Daytona's item Case.
Is it exactly this that you threw Gold away in the dove.
View Detail
Other Reviews From Japanese Webike user
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING