197.07 MXN
(1,794 JPY)
4 (9 opiniones)
Excellent
There are many similar products, but this one is enough!The Harley Shovel's Blinker stopped working, and after investigating a broken ball and a faulty Relay, I thought it was a faulty Switch and purchased this product.
There were various similar products in other Brand, but I chose this one with good cosmetics.
It was easy to replace as it was almost identical to the Blinker switch that was already on it.
The new one still works well with the Switch and the Blinker lights up well after installation.
Horn is using a different switch, so I put insulated tape around the Horn wire and Tie Wrapped it to the other wires.
The texture of Plating is good, so I am satisfied.
Reviews For GOODS Mini interruptor intermitente From Other Webike User
Terrible
With the renewal around HandlebarOther companies also had similar products, but purchased this because it was cheap.
There is no manual attached to the manual so please refer to Manufacturer's website.
Do not forget to prepare the Wiring diagram of your own vehicle for installation at DIY.
The structure is simple, but making is a little cheap. I think that it is a price equivalent.
Since it is not Waterproof Specification, concern about durability. In addition, the resin part also has considerable cheapness.
Does not expect excessive, is not it good for Style-oriented Custom.
Not recommended for those who do Wiring's first work for the first time.
Us, installation. Operation verification - I did it until the trial run, but after all I did not like the cheapness and restored it ...
For your informationView Detail
Poor
Push Switch does not workTwo push switches are attached, but it does not function
Even if you do not have a Wiring diagram, making it as easy as you can see inside
Since Wiring of Push Switch is Body ground, it does not turn on if it is hand painted with Black paint
I think that if you peel off the paint, I will energize, but I have not tried it
In this time I will stop using it and embed Switch in Handlebar
As it is also in Review of other people, it is very simple making
You can adjust the Length by exchanging conductors
Although it is inexpensive, it is not a thing that can be attached, so I can not recommend it to those who do Custom of electrical equipment for the first timeView Detail
Average
Minimum but easy to use. It is easy to cause poor contact with moisture.I used it for SR.
It is more overwhelmingly easier to use than the Toggle switch etc. In Small TypeSize
Feeling that this is an easy-to-use limit.
It is durable Large unexpectedly if I thought that Material itself will deteriorate quickly as price.
One year complete Blue empty storage, but the resin part is not altered at all.
I could stain a little with Uniqlo plating of installation Band but it can not be helped.
Wiring is difficult and only Blinker and Horn can be used after all.
The lower switch is Passing or Cell (← I do not have it in SR) Only
I wonder if it can be used.
Because I felt useless, each individual CEVReplicaSwitch could be good
I feel it..
The difficulty is easy contact failure. No Guard Because it is a tactic, water accumulates
It is good to have difficulty, but the contacts are cloudy.
It is complete by packing WAKOS and AZ's Urea grease inside
solved.
Urea grease 's Waterproof nature is convenient at such times. Try it.View Detail
Very Good
Handlebar is neatRefreshing around Handlebar with Compact.
If you use Electroscopic Tester for installation, you can think that you need ingenuity of yourself to some extent if you can wire the wire securely, but there is nothing particularly difficult.
22 in the other review. Although it was stated that if it is 2mm domestic handlebar it could not be closed and we rounded round and round, but since I could fix it so that it would not turn around if it closes tightly, is it an individual difference?
However, since there is a width widely unexpectedly (GripLimit can not be brought up when thinking about operating Blinker switch) Since the width is not different from that of the OEM's Switch box, the handling of the Handlebar can not be done so far. However, Switch seems to be refreshing Small, Cost performance is also high, I am satisfied.
It looks cheap as the price is, but its appropriate feeling is also cuteView Detail
Excellent
Blinker switch exchange!I replaced the Blinker switch with the Custom of the SR 400 Initial Model.
Although some Wiring processing is required,
It is relatively easy to install.
I was satisfied with Large clean looks.
One difficulty is that depending on the shape of Grip,
Grip processing is required.
Recommended Switch for Classic style Motorcycle.View Detail
Most Viewed Reviews Of GOODS Handle Switch Switch Box
Excellent
The Handlebar area is Refreshing!I was looking for a simple switch since the OEM Handlebar was too brash.
The wiring needs to be cut a little, but it is easy to install because it has a coupler.
good point
The area around the Handlebar is refreshing.
Maybe it's the Design, but it gives a Classic feel.
It's cheaper than other companies.
I can use it normally without any trouble.
A bad point
● No.
The theory behind the TRACKER Custom is to eliminate more and more parts or make the parts smaller, so these parts make sense.
I think it looks great even if you're not a TRACKER type.View Detail
Terrible
To remove the Handlebar SwitchBuy Left Handlebar Switch for Headlight switching at removal.
I will match on my own vehicle that uses Plating parts frequently, but SwitchBody (Particularly resin portion) And Handlebar fitting parts feel very cheap making.
It is a product that can be installed without difficulty if you understand Wiring. It would be even better if you could prepare a Wiring diagram.
I fixed a commercially available Rubber sheet between Handlebar and Switch mounting parts.
Just ... It also checked the operation and there was not any problem in the operation, but again the cheapness was conspicuous, I did not like it, I was forced to restore it.
Style emphasis If Custom is refreshing around Handlebar, if such a Custom is your favorite item is not it a good product.
As above, if you can refer ...View Detail
Terrible
With the renewal around HandlebarOther companies also had similar products, but purchased this because it was cheap.
There is no manual attached to the manual so please refer to Manufacturer's website.
Do not forget to prepare the Wiring diagram of your own vehicle for installation at DIY.
The structure is simple, but making is a little cheap. I think that it is a price equivalent.
Since it is not Waterproof Specification, concern about durability. In addition, the resin part also has considerable cheapness.
Does not expect excessive, is not it good for Style-oriented Custom.
Not recommended for those who do Wiring's first work for the first time.
Us, installation. Operation verification - I did it until the trial run, but after all I did not like the cheapness and restored it ...
For your informationView Detail
Poor
Push Switch does not workTwo push switches are attached, but it does not function
Even if you do not have a Wiring diagram, making it as easy as you can see inside
Since Wiring of Push Switch is Body ground, it does not turn on if it is hand painted with Black paint
I think that if you peel off the paint, I will energize, but I have not tried it
In this time I will stop using it and embed Switch in Handlebar
As it is also in Review of other people, it is very simple making
You can adjust the Length by exchanging conductors
Although it is inexpensive, it is not a thing that can be attached, so I can not recommend it to those who do Custom of electrical equipment for the first timeView Detail
Average
Minimum but easy to use. It is easy to cause poor contact with moisture.I used it for SR.
It is more overwhelmingly easier to use than the Toggle switch etc. In Small TypeSize
Feeling that this is an easy-to-use limit.
It is durable Large unexpectedly if I thought that Material itself will deteriorate quickly as price.
One year complete Blue empty storage, but the resin part is not altered at all.
I could stain a little with Uniqlo plating of installation Band but it can not be helped.
Wiring is difficult and only Blinker and Horn can be used after all.
The lower switch is Passing or Cell (← I do not have it in SR) Only
I wonder if it can be used.
Because I felt useless, each individual CEVReplicaSwitch could be good
I feel it..
The difficulty is easy contact failure. No Guard Because it is a tactic, water accumulates
It is good to have difficulty, but the contacts are cloudy.
It is complete by packing WAKOS and AZ's Urea grease inside
solved.
Urea grease 's Waterproof nature is convenient at such times. Try it.View Detail
Other Reviews From Japanese Webike user
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING