Trabilla integrada
Acabado de pintura negra mate de acero
horas de trabajo : 0.25h
*Si se monta al mismo tiempo el soporte de la barra de sujeción (39583), se necesita un kit de montaje del soporte de la alforja (15416) por separado en la misma cantidad que los soportes de la alforja.
*Si la suspensión trasera ha sido sustituida por un sistema de suspensión no original, es posible que no se pueda instalar.
*Si se instala un silenciador no genuino, es posible que el soporte de la alforja del lado derecho y la bolsa no puedan instalarse dependiendo de la forma del silenciador o del método de extracción del soporte.
*La distancia entre el silenciador y la alforja debe ser de al menos 50 mm.
*Cuando la bolsa está instalada, la anchura total del vehículo aumenta, así que tenga cuidado al conducir.
*Tenga en cuenta que las especificaciones del producto pueden estar sujetas a cambios debido a la conveniencia del fabricante. Por favor, entiéndelo.
Integrated belt loop
Steel matt black paint finish
Working time: 0.25h
*When installing the grab bar carrier (39583) at the same time, the same number of saddlebag support installation kits (15416) as the saddlebag supports are separately required.
*If the rear suspension system has been replaced with a system other than the stock one, it may not be able to be installed.
*When a non-stock exhaust is installed, the right side saddlebag support and bag may not be able to be installed depending on the shape of the exhaust or the method of removing the bracket.
*Please keep a clearance of at least 50mm between the exhaust and the saddlebags.
*When the bag is installed, the overall width of the vehicle increases, so be careful when driving.
*There may be changes in product specifications due to the manufacturer's reasons.