Longitud de comparación genuina : -25mm
Número de pieza de la punta de recambio estándar : ZE56-8929(80mm)
*Al montar el inserto, aplique siempre fijador de roscas al perno de montaje del inserto. Si existe el riesgo de que la punta pueda girar, aplique también un adhesivo de ajuste en la unión entre el eje y la punta. Si es necesario, pegue las juntas, ya que esto dificultará la posterior sustitución de la punta.
*La imagen puede contener otros productos.
*Tenga en cuenta que las especificaciones del producto pueden estar sujetas a cambios debido a la conveniencia del fabricante. Por favor, entiéndelo.
Stock comparison length: -25mm
Standard Replacement Tip Part No: ZE56-8929(80mm)
*Be sure to apply thread-locking agent to the tip mounting bolts when assembling tips.If there is a concern that the tip may turn, apply a fitting adhesive to the joint of the shaft and tip.Please take care of the adhesion to the junction if necessary, because it will be difficult to replace the tip afterwards.
*The image may contain other products.
*There may be changes in product specifications due to the manufacturer's reasons.