Soporte de pinza axial delantera compatible con el diámetro estándar del rotor
Para GALE SPEED/brembo 4POT paso de 40mm
tipo de calibre : GALE SPEED / brembo axial 40mm pitch 4POT
disposición del disco : un solo disco
cuello : negro
Tamaños de rotores compatibles : Diámetro del rotor estándar
*La imagen puede diferir del producto real.
*Los soportes de los calibres de paso de 40 mm están todos diseñados con "calibres de paso de 40 mm brembo". (Los calibres 6POT no son compatibles con este kit.)
*Las calzas incluidas en el kit se pueden utilizar para corregir los errores en los calibres.
*Cuando cambie los calibres o discos, la superficie entre los discos y las almohadillas cambiará. En este caso, se debe raspar la superficie de las pastillas de freno que no toca el disco.
*Paso del tornillo de la pinza GALE SPEED/brembo 40mm:P1.5
*Tenga en cuenta que las especificaciones del producto pueden estar sujetas a cambios debido a la conveniencia del fabricante. Por favor, entiéndelo.
Front axial caliper support for standard rotor diameter
GALE SPEED / brembo 4POT for 40mm pitch
Caliper type: GALE SPEED / brembo axial 40mm pitch 4POT
Disc category: Single disc
Color: Black
Compatible rotor size: Stock rotor diameter
*The product in the image may differ from the actual product.
*All caliper supports for 40mm pitch are designed with "brembo 40mm casting caliper".Since the offset is 26.5mm at the center, please adjust with the attached shim when you use it with AP and NISSIN calipers.(Not compatible with 6POT calipers.)
*The supplied shims are also effective in correcting product errors in individual calipers.
*Changing calipers and rotors will change the contact surface between the rotors and pads.In such a case, scrape off the surface of the pad that does not contact the rotor and use it.
*Caliper bolt pitch: GALE SPEED / brembo 40mmP1.5
*There may be changes in product specifications due to the manufacturer's reasons.