Características del producto
Sólo se tarda 10 segundos en llamar.
Las asas y las cremalleras de color naranja facilitan la visión de la parte delantera y trasera de la funda.
Material de algodón resistente al calor en el interior de la cubierta con una resistencia a la temperatura de aproximadamente 360°C.. No es necesario esperar a que el motor se enfríe.
La función de apriete de la suela no requiere ningún ajuste una vez que se ha apretado.
Con correas para evitar el viento y guardar la cubierta → ¡Ahorro de espacio para guardar la cubierta! No se ensucia la funda durante el almacenamiento.
Una funda para bicicletas que se puede colocar en 10 segundos.
Sólo hay que coger el asa naranja y la cremallera trasera y ponerla rápidamente sobre la parte delantera de la moto, y luego sólo hay que tirar de ella..
La cubierta puede aplicarse con firmeza simplemente tirando de ella hacia atrás, por lo que no es necesario extenderla.
Se tarda 10 segundos en llamar porque no hay movimientos innecesarios..
La cubierta no es visible cuando está arrugada, por lo que no es necesario extenderla.....
Con esta funda para bicicleta, no es necesario desplegarla, gracias a las asas y al cierre de color naranja, que son fácilmente visibles a través del tejido plateado.
Puedes ver el antes y el después de un vistazo..
Se utiliza un tejido de algodón con una temperatura de resistencia al calor de aproximadamente 360°C para que el tubo de escape, que en realidad está más caliente que el silenciador, pueda entrar en contacto con él..
Mientras que las fundas de moto resistentes al calor de otras empresas utilizan tela de algodón en ángulo, centrándose en la zona donde golpea el silenciador, esta funda de moto cubre la zona caliente de forma ajustada y evita que la funda se derrita y se pegue..
Muchas fundas para bicicletas tienen una hebilla central para evitar que el viento las salte..
Pero puede pegarse a las piezas del motor y derretirse, o la cubierta puede derretirse cuando las piezas calientes entran en contacto con las piezas que no están cubiertas con tela de algodón.....
Sobre todo, es muy engorroso de poner y quitar.
Para acortar el tiempo necesario para ello, se adopta una función de sobriedad, lo que significa que una vez que se ha apretado, no es necesario volver a aflojarla..
Con la función de amarre convencional de la cubierta de la moto, hay que aflojarla cada vez que se pone y se quita..
Esta funda para bicicleta tiene una cremallera trasera para poder poner y quitar la funda incluso con el plafón cerrado..
Es un dolor para poner cerraduras en los agujeros de la cerradura delantera y trasera.... Si este es el caso, se puede fijar un cinturón en el orificio de cierre de cada lado para evitar firmemente que el viento se vaya..
Las fundas para motos son grandes y mucha gente tiene problemas para encontrar un lugar donde guardarlas..
En los pisos y condominios, el único lugar donde se puede poner una bicicleta es en el balcón de la habitación o en el suelo de un aparcamiento de bicicletas compartido.....
Pero si la pones en el suelo, se ensucia de arena y polvo y la siguiente vez que usas la funda, la moto se ensucia y la funda no sirve.
Puede guardarlos en un lugar que ahorre espacio y no ensucie la cubierta, uniéndolos con la correa que se proporciona..
Las cubiertas mojadas también pueden colgarse en el tendedero para que se sequen..
Otras características son las rejillas de ventilación para evitar la congestión en el interior de la cubierta, un orificio de cierre de 40 mm de diámetro para la seguridad de la moto y una protección contra los rayos UV de más del 90%.
Sus características incluyen un tejido grueso de 300D que repele el agua y mucho más.
Cómo cuidar el producto
Para proteger el efecto hidrófugo del tejido, no utilice la lavadora ni lo escurra..
Elimine las manchas con agua tibia o agua, o pase un paño humedecido con detergente neutro diluido y escúrralo bien..
Si la cubierta se deja con polvo o suciedad durante un largo periodo de tiempo, el efecto hidrófugo se verá dañado..
■Product Features
・It only takes 10 seconds to call
・Orange handles and zipper make it easy to see the front and back of the cover
・The inside of the cover is made of a heat-resistant cotton material with a temperature of about 360 degrees Celsius.No need to wait for the engine to cool down
・Once squeezed, the sole squeezing function does not require adjustment
・With a belt for wind-skipping prevention and cover storage → space-saving cover storage!No more soiling the cover when storing it!
■ Put it on and feel it!Bike cover that can be put on a bike in 10 seconds
Just take the orange handle and rear zipper and quickly put it over the front of the bike, then just pull it on.
Just pull it backwards to apply the cover securely, so there's no need to spread it out like a flap!!!
It can be applied in 10 seconds with no wasted motion.
When the cover is placed in a crumpled position, it is difficult to tell the front and back of the cover, and it is necessary to spread it out.
With this bike cover, you don't have to unfold the cover, with orange handles and zippers that are easily visible through the silver fabric!
You can tell the front and back at a glance.
Cotton fabric with a heat resistance temperature of approximately 360 degrees is used so that the exhaust pipe, which is actually hotter than the exhaust, can come in contact with it.
While other companies' heat-resistant motorcycle covers use cotton fabric at an angle, focusing on the area where the exhaust hits, this motorcycle cover covers the area that gets hot and prevents the cover from melting and sticking to the exhaust.
Many bike covers should have a center buckle to prevent wind skipping.
However, the cover may melt by sticking to the engine parts, or by touching the hot parts where the cotton fabric is not attached....
Above all, it's very cumbersome to put on and take off!
In order to shorten the time required for this, a function is adopted that allows the bottom to taper so that once it is tightened, there is no need to loosen it again.
With the conventional thread-squeeze function of the bike cover, it is necessary to loosen the cover each time it is put on or taken off.
With this bike cover, the rear zipper allows the cover to be attached and detached even with the soffit closed.
It's a hassle to put locks on both the front and rear lock holes... If this is the case, you can attach a belt to one of the locking holes to prevent the wind from blowing off.
Bike covers are large, so many people have trouble finding a place to store them.
In an apartment or condominium, the only place to put a bicycle is on the balcony of your room or on the ground of a shared bicycle parking lot....
But if you put it on the ground, it gets so dirty with sand and dust that the next time you use the cover, the dirt gets on the bike and the cover is useless!
The attached belt can be used to put them together to save space and keep them in a place where the cover will not get dirty.
The cover can be hung on a clothesline when wet, so it can be hung to dry properly.
Other features include air vents to prevent steam inside the cover, a 40mm diameter lock hole for motorcycle security, and over 90% UV protection!
It has many features, including a water-repellent 300D thick fabric!
■How to care for the product
・To protect the water-repellent effect of the fabric, please do not use a washing machine or wring it out.
・For stains, rinse with lukewarm water or water, or wipe with a cloth dampened with diluted neutral detergent and squeeze tightly.
・If the cover is left with dust or dirt on it for a long period of time, the water repellent effect will be lost.