[Especificación]Caja del filtro de aire normal
[Color de la carrocería] Plata (la tapa superior y el perno de drenaje también son plateados)
[Diámetro]Φ28
[Paso del carburador] 77-93-77
[Posición del enlace] Centro
[Diámetro exterior de la espiga (mm)]34mm
[Longitud de la espiga (mm)]27mm
[Establecer el contenido]
Cuerpo del carburador (cuerpo plateado del carburador TMR-MJN28)
Adaptador de la caja del filtro de aire
Tubo interior del acelerador para Z1
Manguera de combustible
Junta en T / manguera de combustible
・MJ : #107.5 #117.5 PAJ : #105 #115
Manual del propietario del TMR
[Ajuste de fábrica]
MJ : #112.5 PJ : #20.0 PAJ : #110 PS : 1 y 1/8 de vuelta
*Datos de referencia MJ con silenciador normal : #110
[Especificaciones del vehículo de desarrollo]
Z1 : Motor de serie, cilindrada 903cc, caja del filtro de aire perforada
Piezas de montaje
bufanda : Yoshimura Racing Hand Curved Straight Cyclone (40º Aniversario)
ign ignorar : Configuración del kit SP2 Full Power : #0 Normal Special (número de pieza de AS Utani) : 0310P)
*El TPS está disponible para el registrador de datos y el encendedor.
*El TPS puede montarse en dos ángulos diferentes. (para la calibración del sensor).
*Se recomienda perforar dos agujeros de 43 mm de diámetro en la caja del filtro de aire. Es posible conducir sin modificaciones, pero no es posible mostrar el rendimiento original.
*Es posible cambiar al embudo, al embudo de doble pila o a la especificación del filtro de potencia comprando las piezas por separado, pero tiene que configurarlo usted mismo porque no hay datos de configuración.
*Pueden incluirse otros tipos y productos en la imagen.
*Tenga en cuenta que las especificaciones del producto pueden estar sujetas a cambios debido a la conveniencia del fabricante. Por favor, entiéndelo.
[Specification] Normal air cleaner box
[Body color] Silver (Top cover and drain bolt are both silver)
[Caliber] Φ28
[Carburetor pitch] 77-93-77
[Link position] Center
[Spigot outer diameter(mm)] 34mm
[Spigot length(mm)] 27mm
[Set components]
・Carburetor Body(TMR-MJN28 Carburetor Silver Body)
Air cleaner box adapter
Throttle Inner Pipe for Z1
Fuel hose
T Joint / Fuel Hose
MJ:#107.5 #117.5 PAJ:#105 #115
TMR Owner's Manual
[factory setting]
MJ:#112.5 PJ:#20.0 PAJ:#110 PS:1 and 1/8 turn back
*Reference data when using the standard exhaust MJ:#110
[development vehicle specifications]
Z1:Engine stock, displacement 903cc, air cleaner box drilled
Installed parts
Exhaust:Yoshimura Racing Hand Curved Straight Cyclone (40TH ANNIVERSARY)
Igniter:SP2 Full Power Kit Configuration:#0 Normal Special (AS Utani Part Number:0310P)
*TPS is available for data loggers and igniters.The parts from the coupler to the TPS sensor are not available from YOSHIMIURA, so please prepare them separately.
*The TPS can be mounted at two different angles.(for sensor calibration)
*Φ43X2 holes are recommended for air cleaner box.It is possible to drive without modification, but the original performance cannot be demonstrated.
*It is possible to change to the funnel specification, dual stack funnel specification, and power filter specification by purchasing parts separately, but since there is no setting data, it is necessary to set it by yourself.
*Images may contain other types and products.
*There may be changes in product specifications due to the manufacturer's reasons.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.