[Material]Duralumina A2017
[Color]Manillar : Negro
[Tratamiento de superficies]Tuerca : Aluminio duro anodizado
[Posición de la manija]4 posiciones: Street Hi (STD) *CAFE sólo está disponible para 1 puesto
[Tamaño del manubrio]
Longitud total : 280mm
Diámetro interno : 16mm
[Ángulo de colgar]
calle : +5 grados
Carreras : -5 grados
[Ángulo de apertura / altura]Gratis
[Bloqueo del manillar]Disponible
[Función del tope del manillar]Disponible
[Bearing]
Lado del soporte inferior : Disponible
Lado superior del puente : No disponible (Reutilización de existencias)
[Especificación]
Soporte principal de freno de stock : Disponible
Soporte de portaembrague de stock : Disponible
Freno RCS BREMBO confirmado
Soporte de luces, medidor, bocina, etc. Se puede utilizar el producto de stock
[Piezas incluidas]
Soporte de medidor exclusivo
Conjunto exclusivo collar
[Frenos / Embragues]
Según la posición, el depósito de aceite y el cable del embrague pueden interferir con la tapa del contador.
Hay que cambiar el latiguillo de freno por uno externo o cambiar el trazado.
[Cables]
Hay que cambiar el cable del acelerador, el del embrague y el del interruptor.
[Descripción del puesto]
Al instalar las abrazaderas de la horquilla, los pernos de las abrazaderas deben estar orientados hacia afuera con el accesorio de la abrazadera del manillar apuntando hacia arriba.
Las abrazaderas del manillar están orientadas a +5 grados en la posición a horcajadas.
No se pueden instalar otras posiciones ya que interferirían con los intermitentes de fábrica.
*La dirección de la moto se juzgará cuando la moto esté a horcajadas.
*Los números de parte compatibles son diferentes para Z900RS y Z900RSCAFE, así que por favor compruebe y compre de antemano.
*Debido a que la altura y la anchura se modifican con respecto a la genuina, es necesario el cambio estructural para adaptarla a la vía pública. Si no solicitas la modificación estructural y cambias los datos de la matrícula de la moto, no podrás utilizarla en la vía pública.
*Este kit es de uso exclusivo para la Z900RS CAFE e incluye las piezas necesarias para su instalación. Para la Z900RS sin carenado, por favor compre otro número de pieza.
*La posición de la Z900RSCAFE está limitada para evitar interferencias con los intermitentes originales. Por favor, compruebe las siguientes precauciones antes de comprar.
*Sólo la calle Hi (STD) puesto está disponible.
Dado que el propio cilindro maestro está cerca del indicador, el ángulo de instalación del cilindro maestro está limitado. Por favor, ajuste el ángulo para que no toque el indicador. (Ver la imagen)
Para evitar interferencias con el carenado, el carenado, el contador y la luz estarán desplazados hacia la parte delantera. (ver foto)
Al instalar el espejo retrovisor, es necesario retirar la abrazadera del espejo. Tenga en cuenta que el espejo no se puede sustituir si está fijado al manillar. Dependiendo del tipo de espejo, es posible que no se pueda instalar debido a la interferencia con el carenado.
*Es posible utilizar productos de stock como el soporte de luces, los medidores y las bocinas.
*Es necesario taladrar el manillar porque se trata de un interruptor fijo BOX.
*Utilice los tornillos de sujeción originales para el soporte inferior.
*Los extremos de la barra no están incluidos y deben adquirirse por separado.
*Se requieren conocimientos y herramientas profesionales para la instalación, por lo que le rogamos que solicite la instalación a un taller profesional con mucha experiencia.
*El espejo que se muestra en la imagen es de tipo ZII soporte corto.
*Otras partes pueden estar contenidas en la foto.
*La imagen única es de color:Marrón / Negro.
* Tenga en cuenta que las especificaciones del producto pueden cambiar debido a razones del fabricante.
[Material] Duralumin A2017 material
[Color] Handlebar: Black
[Surface treatment] Stem nut: hard anodizing
[Handlebar position] 4 positions: Street Hi (stock) *CAFE only supports one position
[Handlebar Size]
・Total length: 280mm
・Inner diameter: 16mm
[Sweep angle]
・Street: +5 degrees
・Racing: -5 degrees
[Opening angle / Height] Free
[Handlebar locks] Available
[Handlebar stopper function] Available
[bearings]
・Under bracket side: Accessory
・Top bridge side: Stock to be reused
[Specification]
・Compatible with stock brake master
・Compatible with stock clutch holder
・Confirmed Brembo RCS brakes
・Stock light bracket, meter, horn, etc. can be used
[Components]
・Special meter brackets
・Exclusive collar set
*Brake / Clutch*
・Depending on the position, the oil tank and clutch wire may interfere with the meter cover.
・The brake hose needs to be changed to an aftermarket one or the routing needs to be changed.
*Wires*
・The accelerator wire, clutch wire, and switch cables need to be changed.
*Position Details*
・When installing the fork clamps, the clamp bolts should face outward with the handlebar clamp attachment pointing upward.
・The handlebar clamps face +5 degrees in the straddled position.
・Other positions cannot be installed as they will interfere with the stock blinkers.
*The direction of the vehicle is determined by riding on the vehicle.
*Compatible part numbers are different for Z900RS and Z900RS CAFE, so please check and purchase beforehand.
*This kit is specially designed for Z900RS CAFE with additional parts required for installation.For Z900RS without cowl, please purchase another part number.
*Z900RS CAFE has a limitation on the position to avoid interference with the stock blinkers.Please read the following notes before purchasing.
*Only Street Hi (stock) position is compatible.
・Since the master cylinder is close to the blinker, the installation angle of the master cylinder is limited.Adjust it so that it does not touch the blinker.(See image)
・In order to prevent interference with the cowl, the cowl, meter and light will be offset to the front.(See image)
・When installing the rearview mirror, it is required to remove the mirror clamps.Please note that the mirror cannot be replaced if it is fixed to the handlebar.Depending on the type of mirror, it may not be able to be installed due to interference with the cowl.
*The light bracket, meter, horn, etc. can be used with the stock products.
*Hole drilling to the handlebar is required to fix the switch box.
*Use the stock clamp bolts for the under bracket.
*Bar ends are not included and must be purchased separately.
*Installation requires specialized knowledge and tools, so please contact a professional shop for installation.
*The mounting mirror in the image is ZII type short bracket.
*Images may contain other products.
*The individual images are in color: Brown / Black.
*There may be changes in product specifications due to the manufacturer's reasons.