Hecho por KEPSPEED
[Especulación. ]
·Negro (Izquierda) :Tierra
Blanco (Parte superior) Luz de carretera
·Azul (Derecha) :Luz de cruce
[Tamaño]
Longitud total aproximada: 135 mm (incluyendo aprox. 10mm de proyección de la parte superior)
Diámetro máximo: Aproximadamente 165 mm
Paso de instalación del soporte: Longitud de la cuerda flexible
[Piezas incluidas:] Válvula: H4Bombilla de halógeno (temperatura de color equivalente a 3000-3300K)
[País de origen] CHINA
*La goma de ranura transparente sólo se incluye con la caja.
*No hay lugar para poner el velocímetro de stock y la luz neutra.
*En cuanto al cableado, ya que el cable adjunto está en el estado en que se corta el cordón, se requiere alguna modificación. Por favor, tenga esto en mente.
*La caja de madera que se muestra en la imagen es sólo para fines fotográficos y no está incluida.
* Contiene otras partes en la foto.
* Tenga en cuenta que las especificaciones del producto pueden cambiar debido a razones del fabricante.
*Para cada producto, hay algunos puntos que son ligeramente diferentes de la imagen introducida en los detalles, pero daremos prioridad al producto real, así que por favor entiendan.
*Buscamos un técnico de mantenimiento de motocicletas para hacer el montaje en un taller especializado en mantenimiento de motocicletas.
*Después del inicio de la conducción, preste atención a la aparición del llamado "aflojamiento inicial" y realice inspecciones frecuentes para evitar problemas inesperados.
[Sobre la garantía del fabricante]
* Hay casos en que los pequeños arañazos ocurrirán debido a un problema de transporte.
* No está cubierto por la garantía excepto por defectos que afectan seriamente el valor o la función del producto.
[Instalación]
* El método de instalación es más o menos el mismo que los productos OEM.
* Por favor, fíjelo al soporte del faro con el perno izquierdo y derecho.
*El medidor y la lámpara neutra no pueden ser integrados en el faro. Por favor, consulte las instrucciones de instalación separadas.
*Como el cableado sigue cortado, se requiere una modificación.
*Dado que puede causar un cortocircuito, una persona con conocimientos debería trabajar y comprobar la conexión antes de conectarla.
*Tenga en cuenta que los accidentes de cortocircuito causados por errores de cableado no están cubiertos por la garantía del fabricante.
*La salida de los cables está en un estado muy agudo.
*Si utiliza el producto tal como está, existe la posibilidad de que el cableado se corte o se ponga en cortocircuito.
*Utilice la goma de ranuras transparentes suministrada según corresponda.
■Made by KEPSPEED
[Specification]
・Black (left): Grounding Cable
・White (top): high beam
・Blue (right): low beam
[Size]
・Total length approx.: 135mm (including approx. 10mm projection at the top)
・Maximum diameter: Approx. 165mm
・Bracket mounting pitch: About 15cm
[Components] Valve: H4 halogen bulb (color temperature equivalent to 3000-3300K)
[Country of origin] CHINA
[Notes on purchase]
*All GM-MOTO products are custom parts.Since these products are set up in response to the requests of heavy users, there may be parts of the product that change or decrease from the original driving performance.Please use as dress-up parts for show model machines.Therefore, it is not suitable for driving on public roads or tracks.In some cases, it may not be possible to mount the unit on a motorcycle, or adjustments and modifications may be required in various areas.
※Transparent groove rubber is included only with the case.
※There is no place to put the stock speedometer and neutral light.
※Some modification is required for the wiring as the supplied cable is cut off from the cord.
*The wooden box in the image is for photographic purposes only and is not included.
*Images may contain other products.
*There may be changes in product specifications due to the manufacturer's reasons.
※For each product, there are a few points that differ slightly from the image introduced in detail, but GM-MOTO will give priority to the actual product.
*Please have assembly work done in a specialist shop regarding motorcycle maintenance.
※After the start of riding, pay attention to the occurrence of so-called initial loosening and perform frequent inspections to prevent unexpected problems.
*Because it is made overseas, the molding, welding, painting, etc. may be insufficient.There may be some minor scratches and scuffs due to transportation problems.
[About the installation]
※The installation method is generally the same as the stock one.
※Fix to the headlight bracket with the bolts on both sides.
*The meter and neutral lamp cannot be integrated into the headlight.Separate installation instructions must be developed.
※The wiring is still cut and must be modified.
*Please have a knowledgeable person work on and check the connection before connecting, as it may cause a short circuit.
※The wire extraction port is in a sharp condition.
*If using it as is, there is a possibility that the wiring will be cut or short-circuited.
※Use the supplied clear groove rubber as appropriate.