Acero cromado (Recubrimiento de 3 capas)
[Instalación]
*El eje es un componente crítico.
Por favor, asegúrese de que personal cualificado haga el trabajo de instalación en la tienda profesional.
Por favor, hágalo usando la herramienta adecuada para la forma de la cabeza del eje.
Está rayado en la película de chapa que se aplica a la superficie del eje, causando oxidación si se aprieta con una herramienta inadecuada.
Por favor, rocíe grasa en la superficie del eje antes de instalarlo.
Por lo general no causa oxidación del propio eje porque aplica el "proceso de recubrimiento de tres capas" de KOOD original en la superficie del eje. Es causado por la diferencia de potencial del metal, para prevenir la oxidación del cojinete de la rueda, etc.
Por favor, observe los valores especificados por el fabricante para el par de apriete.
Por favor, confirme la tuerca para los vehículos que se van a montar con la tuerca OEM.
Por favor, asegúrese de usar una tuerca nueva cuando se vea en la tuerca, como los arañazos causados por la caída y la parte de la función de auto-bloqueo. Esto es para prevenir el daño a la parte roscada del eje.
[Sobre la calidad del producto]
En cuanto a la gestión del producto, fabrica y gestiona en un sistema perfecto, pero por favor, póngase en contacto con nosotros antes del trabajo si tiene algún problema por casualidad.
*En cualquier caso, no podemos responder a las reclamaciones y productos devueltos después del trabajo (como pasar el eje a través de la rueda) en absoluto.
Sobre el óxido
"KOOD made shaft" ha sido sometido a un "proceso de revestimiento de tres capas".
Tiene un fuerte proceso de revestimiento en comparación con el revestimiento ordinario de chapa. Puede oxidarse dependiendo de la situación de uso, pero no importa la calidad.
Se está "oxidando".... el óxido del exterior se desliza por la superficie del revestimiento
Óxido de transición. El óxido externo en la superficie chapada
Daños en el revestimiento.... Uso incorrecto de herramientas, pisadas o caídas mientras se conduce, etc.
*El óxido no está cubierto por la garantía.
Gracias por su comprensión.
* Contiene otras partes en la foto.
* Tenga en cuenta que las especificaciones del producto pueden cambiar debido a razones del fabricante.
[Material] Chromoly steel (3-layer plating finish)
Without plating nut
*There may be changes in product specifications due to the manufacturer's reasons.
*Even if the vehicle is compatible, it will not fit if the front forks are not stock or if the vehicle has been customized.
[About the installation]
*Axle shafts are critical parts.
Installation must be carried out by qualified personnel at a professional shop.
・Please use the appropriate tool for the head shape of the shaft.
If the shaft is tightened with an inappropriate tool, the plating film on the shaft surface will be scratched and rust will be caused.
・Before installation, apply grease or other oil to the shaft surface.
The surface of the shaft is treated with KOOD's original "3-layer plating film", so rust will not occur on the shaft itself under normal use.The purpose is to prevent rust transfer from wheel bearings, etc., which is caused by the potential difference of metals.
・Please observe the tightening torque specified by the manufacturer.
・If the vehicle is installed using the stock nut, please check the nut.
If the nut is damaged by tipping over, etc., or if the self-locking part is worn out, be sure to use a new nut.This is to prevent damage to the shaft threads.
[About Product Quality]
・KOOD has taken all possible measures to manage the production. However, if there is any problem, please contact KOOD before the work.
*In no event will KOOD accept any claims or returns after the installation (such as threading the shaft into the wheel).
・About rust
KOOD shafts are treated with a "3-layer plating film".
It is processed with a stronger film than normal plating film.Rust may occur depending on the usage conditions, but there is no problem with the quality.
・Transferred rust: Rust from the outside gets on the plated surface
・Damage to the plating film... Improper use of tools, flying rocks during riding, falls, etc.
[Caution]
In case of KOOD shafts with plated nuts, damaging the threads during installation often happens.
Due to the nature of plating, this is often seen when the plated parts (e.g. KOOD shaft and KOOD nut) mesh with each other or when the threaded part is greaseless.
Please use an anti-corrosive grease such as sledge compound on the screw part when you install it.