Pernos de pivote, juego de 2
material : mirlo
*Tenga en cuenta que las especificaciones del producto pueden estar sujetas a cambios debido a la conveniencia del fabricante. Por favor, entiéndelo.
[Instalación]
*El eje es una parte importante. La instalación debe ser realizada por personal cualificado en una tienda profesional.
Use las herramientas adecuadas para operar la máquina.
Si se utiliza una herramienta inadecuada para apretar el eje, la superficie chapada del eje puede rayarse, lo que puede conducir a la oxidación.
Esparce grasa y otros aceites en la superficie del eje antes de la instalación.
La superficie del eje está recubierta con el revestimiento original de 3 capas de KOOD, que evita que el eje se oxide con el uso normal. Esto es para evitar que el óxido se transfiera de los cojinetes de las ruedas, etc. causado por la diferencia de potencial eléctrico del metal.
El par de apriete debe estar de acuerdo con las especificaciones del fabricante.
Si su vehículo está equipado con las tuercas genuinas, por favor, compruebe las tuercas.
Si las tuercas están desgastadas o rayadas debido a una caída, etc., asegúrate de usar tuercas nuevas. Esto es para prevenir el daño a las partes roscadas del eje.
[Calidad del producto]
Sin embargo, si tiene algún problema, por favor, póngase en contacto con nosotros antes de su trabajo.
*Bajo ninguna circunstancia seremos responsables de ninguna reclamación o devolución del producto después de la instalación (por ejemplo, al enroscar la rueda con el eje).
Sobre el óxido
Los ejes de KOOD están revestidos con tres capas de chapado. Comparado con el proceso normal de enchapado, los ejes KOOD tienen un recubrimiento más fuerte. Según las condiciones de uso, puede producirse oxidación, pero esto no afecta a la calidad del producto.
*Las principales causas del desarrollo del óxido
El óxido del exterior puede ser transferido a la superficie chapada.
Daños en la película chapada: uso erróneo de herramientas, pisadas o caídas mientras se conduce, etc.
*Tenga en cuenta que el óxido no está cubierto por la garantía. Por favor, tenga en cuenta que esto no está cubierto por la garantía.
Pivot bolt, set of 2
Material: chromoly
*There may be changes in product specifications due to the manufacturer's reasons.
[About the installation]
*The shaft is a critical component.Installation must be carried out by qualified personnel at a professional shop.
・Please use the appropriate tool for the head shape of the shaft.
If the shaft is tightened with an inappropriate tool, the plating film on the shaft surface will be scratched and rust will be caused.
・Before installation, apply grease or other oil to the shaft surface.
The surface of the shaft is treated with KOOD's original "3-layer plating film", so rust will not occur on the shaft itself under normal use.The purpose is to prevent rust transfer from wheel bearings, etc., which is caused by the potential difference of metals.
・Please observe the tightening torque specified by the manufacturer.
・If the vehicle is installed using the stock nut, please check the nut.
If the nut is damaged by tipping over, etc., or if the self-locking part is worn out, be sure to use a new nut.This is to prevent damage to the shaft threads.
[About Product Quality]
・KOOD has taken all possible measures to manage the production. However, if there is any problem, please contact KOOD before the work.
*In no event will KOOD accept any claims or returns after the installation (such as threading the shaft into the wheel).
・About rust
KOOD shafts are treated with a "3-layer plating film".It is processed with a stronger film than normal plating film.Rust may occur depending on the usage conditions, but there is no problem with the quality.
*Main causes of rusting
・"Transferred rust": External rust rides on the plated surface
・Damage to the plating film: Improper use of tools, stepping stones while driving, falls, etc.
[Caution]
In case of KOOD shafts with plated nuts, damaging the threads during installation often happens.
Due to the nature of plating, this is often seen when the plated parts (e.g. KOOD shaft and KOOD nut) mesh with each other or when the threaded part is greaseless.
Please use an anti-corrosive grease such as sledge compound on the screw part when you install it.