Superficie del asiento - diseño de 20mm
[Adjunta]
Cuerpo de la capucha del asiento
Tablero trasero
Plataforma de asientos
Los asientos se quedan
Lámina de caucho
Tornillos
*Necesitas cortar la placa de respaldo de la acción (parte ABS). No puedes instalar la luz trasera después de cortarla.
*Si recompra la placa de respaldo de fábrica (pieza ABS), puede instalar las luces traseras de nuevo.
*Acerca de Gelcoat
El gelcoat es la base de la pintura. Ya que cada color está disponible, se pueden mezclar otros colores con el gelcoat. Dado que este producto es un requisito previo para la pintura, existe la posibilidad de que se mezclen otros colores o que la superficie de la superficie pintada se vuelva transparente cuando el producto esté terminado (pulido).
*La imagen contiene otros tipos y colores.
Seat surface -20mm design
[Component]
・Seat cowl unit
・Back plate
・Seat stand
・Seat bracket
・Sheet Rubber
・Screws
*The stock back plate (ABS part) needs to be cut off.Taillight can not be installed after cutting.
*If you buy the stock ABS back plate, you can install the taillight again.
*Image includes other colors and types.
*There may be changes in product specifications due to the manufacturer's reasons.
[about gelcoat]
*Gelcoat is the "base" for the paint.
*Because each color is set, other colors may be mixed in.
*Please note that this product is designed to be painted, so please be aware that other colors may be mixed in, and that the surface of the ground may show through when the split surface is finished (polished).
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.