Este producto es una versión con cambios menores del AE-68125.
El espacio de la capota ha sido reevaluado para adaptarse a los cambios en las especificaciones de la montura del radiador para el año modelo 2019 (*1) y hemos optimizado la forma para un ajuste más inteligente..
(*1) Detalles del cambio de especificación: Acero inoxidable (plata) a resina (negro) para la montura del radiador..
Protege de forma segura el cárter de magnesio.
El cárter del Panigale V4 está hecho de magnesio para reducir el peso..
Los protectores AELLA están hechos de aluminio mecanizado (A2017) con anodizado duro para aumentar la resistencia de la superficie, y su color único coincide con la cubierta de magnesio.. El color es como el oro del champán, pero el color es anodizado, por lo que no se desvanece por el calor o los rayos UV.. (*Dependiendo del tamaño del lote de aluminio anodizado, puede haber una ligera diferencia de color. Es posible que el lado izquierdo y el derecho no sean exactamente del mismo color.. )
La forma es el aspecto más importante del diseño, y está diseñado para ser lo más delgado posible..
El grosor máximo de la pared es de 6 mm, con un máximo de 2,5 mm en los puntos donde no se aplica ninguna carga.. El interior de la cubierta está cubierto con caucho fluoroplástico resistente al calor para suavizar el impacto de la caja en caso de caída..
Otros beneficios
Se puede usar con los deslizadores de motor AELLA.
La instalación también es posible simplemente quitando la capota inferior..
This product is a minor change product of AE-68125.
AELLA has re-evaluated and optimized the shape for smarter fitting to accommodate the change in cowl clearance due to the change in specifications (*1) around the radiator mount for 2019 models.
(*1) Regarding the change in specifications: The radiator mount is changed from stainless steel (silver) to resin (black).
Securely guards the magnesium crankcase.
The crankcase of the Panigale V4 is made of magnesium to reduce the weight, and if it is damaged during a fall, such as a fall from a standing start, it will require expensive replacement.
The AELLA guard is made of machined aluminum (A2017 material) and hard anodized to increase surface strength, and its unique color matches the magnesium cover.The color is like champagne gold, but it is uncolored anodized aluminum, so it does not fade due to heat or ultraviolet rays.(*Depending on the lot of anodized aluminum, there may be a slight color difference.The color may not be exactly the same on both sides.)
The shape is the most important part of the design, so that the thickness (protrusion) does not appear as much as possible.
The maximum thickness of the wall is 6mm, and 2.5mm at the point where there is no burden.The inside of the cover is covered with heat-resistant fluorine resin rubber to soften the impact on the case in the event of a fall.
○Other benefits
・This product can be used with AELLA engine sliders.
・Installation can be done by simply removing the lower cowl, and it takes only a few minutes for the product to be installed.