Se puede montar en el manillar de serie sin necesidad de cablear el "Φ48 Kit de tacómetro DN pequeño 12500RPM".
Detalles
Este producto viene con un soporte de sujeción y un subarnés específico para el vehículo que es compatible con el manillar de fábrica, eliminando la necesidad de modificar las piezas y el cableado de fábrica..
El cableado se puede hacer conectando el acoplador de servicio en el arnés principal con el sub-arreglo dedicado..
Φ48 tacómetro DN pequeño DN=aguja digital
Las señales digitales y los pequeños motores controlan completamente el ángulo del puntero, lo que resulta en una alta retención del puntero y una excelente fiabilidad..
Además de la función de RPM, el propio medidor está equipado con un termómetro, un reloj, un temporizador de trabajo del motor y una función de medición automática (registro de la temperatura máxima/rpm)..
El panel negro con iluminación LED blanca proporciona un excelente reconocimiento en la noche.
Detalles de Φ48 pequeño tacómetro DN
El monitor está equipado con varias funciones (pantalla digital)
Se incluyen un termómetro (capaz de medir hasta 150 grados centígrados) y un sensor de temperatura de palo, para poder medir la temperatura del aire exterior cuando el sensor de temperatura se coloca en la capucha..
Función de medición automática
El registro de la temperatura máxima/rpm se registra automáticamente cuando se instala el medidor.
Después del paseo, puede comprobar el registro cambiando la pantalla del medidor y el registro se guarda hasta que lo restablezca..
Temporizador de trabajo del motor
Un temporizador que automáticamente suma el tiempo de funcionamiento del motor por encima de las 500 rpm.
Se detiene cuando baja de 500 rpm..
Tiempo máximo: 9999 horas (Hasta 100 horas se registran en minutos, más de 100 horas se registran en horas.. ) Reajustable.. Con ajustes ocultos
Relojes
Pantalla de 24 horas, sin pantalla
The "Φ48 Small DN Tachometer Kit 12500RPM" can be installed on the stock handlebar without any wiring modification
■Details
This product comes with a clamp bracket that is compatible with the stock handlebar and a motorcycle specific sub-harness, so you can install the Φ48 Small DN Tachometer 12500RPM on the Cross Cub 50 (AA06) and Cross Cub 110 (JA45) without the need to modify the stock parts or wiring.
The wiring can be connected to the service coupler on the main harness by using the dedicated sub harness.
■Φ48 Small DN Tachometer DN = Digital Needle
The angle of the pointer is completely controlled by a digital signal & small motor, which provides high reliability and high holding power of the pointer.
In addition to the RPM function, the meter is equipped with a thermometer, a clock, an engine work timer, and an automatic measurement function (maximum temperature record / maximum RPM record).
The black panel with white LED lighting provides excellent nighttime visibility.
■Φ48 Small DN Tachometer Details
・The monitor is equipped with a variety of functions (digital display)
A thermometer (up to 150 degrees) and a stick temperature sensor are included, so you can measure the outside air temperature by placing the temperature sensor inside the cowl.
・Automatic measurement function
The maximum temperature record and the maximum rpm record are done automatically when the meter is installed.
After running, you can check the record by switching the meter display, and the record will be saved until resetting.
・Engine work timer
Timer that automatically adds up the engine operating time above 500rpm.
It stops when the speed drops below 500rpm.
Maximum time: 9999 hours (up to 100 hours is recorded in minutes, and over 100 hours is recorded in hours.) Resettable.There is a non-display setting
・Clock
24-hour display with hide setting