Un kit de capucha de cola con una silueta alargada con 70mm más de largo que la culata..
Las defensas internas de acero están incluidas en el cuerpo de la capucha de FRP..
Reubicó los intermitentes de fábrica, las luces traseras, las luces de números y los reflectores a los guardabarros interiores,
La luz trasera está diseñada para sobresalir unos centímetros de la capucha para afirmar su presencia..
Los ganchos de carga de las acciones pueden ser usados tal como están..
También se puede instalar con las barras de agarre de fábrica..
Las señales de giro se ajustan aproximadamente a la misma posición que las de las acciones.
Las luces numéricas, los reflectores, etc. serán reubicados del original..
La luz trasera sobresale 17mm de la capucha en la parte superior, destacando el diseño heredado de la Z1.
The tail cowl is 70mm longer than the normal cowl to give it a more elongated silhouette.
The body of the cowl is made of FRP with sufficient strength.
Available as a set with special inner fenders and extension harnesses or as just the cowl itself.
Special inner fenders are used by relocating the stock turn signals and taillights.
To show the design of the taillight, it is set to stick out 17mm beyond the body of the cowl.
Can be combined with long tail cowl and stock fenders.
In this case, the tail light is 70mm deeper than the cowl itself.
The stock hooks can be used.It can also be installed with the stock grab bar.
The blinkers will be set in the same position as the stock blinkers.
The special inner fenders are used by relocating the stock license plate lights and reflectors.
The taillight protrudes 17mm from the cowl at the top part, highlighting the design inherited from Z1.