cuello : negro
material : Aluminio revestido de polvo, acero inoxidable, plástico de alta resistencia
El tamaño de la bola : 1
[Rango de montaje]
Abrazadera en forma de U : Φ13mm-Φ31mm
X-Grip : Anchura 48mm-82mm, espesor hasta 22mm
[Establecer el contenido]
X-Grip para Smartphones
Brazo estándar
Abrazadera en forma de U
Cinturón.
[Especificaciones]
Juego X-Grip
Para los Smartphones
Procesamiento : nada
*No maneje el equipo de ramount mientras va en la bicicleta. Existe la posibilidad de dañar los dispositivos electrónicos (por ejemplo, el smartphone, el sistema de navegación, etc.) debido a la vibración cuando la bicicleta está montada en el ramal. (Por favor, úsalo bajo tu propio riesgo.)
*En este caso, puede haber un hueco entre la montura y el objeto que se va a montar debido a que los pernos de montaje se pegan al orificio de montaje del objeto (por ejemplo, la cámara digital). Existe la posibilidad de dañar el agujero de la montura si los tornillos de montaje se aprietan excesivamente. Por favor, tenga cuidado de no dañar el agujero de montaje.
*Por favor, arregle el smartphone con la correa de sujeción (goma elástica) para evitar que se caiga.
*Hay diferencias individuales en la calidad de la pintura y el recubrimiento entre los productos.
Type: X-Grip & U-Clamp
Color: Black
Size: 1 inch ball
Weight [grams]: 354g
Material [Material]: Marine-grade aluminum, high strength composite, stainless steel
Compatibility: Width of mounting point 47.6-82.5mm, Thickness -22.2mm, Diameter of mounting point Φ12.7-31.75mm
Where Used: Handlebar (Milibar/Inch bar/Taper bar), Round pipe
Quantity: 1 pc.
Kit contents: X grip (S) + standard arm + U-shaped clamp base
Components: Tether band, adhesive for rubber cap, 1/4inch-20 U-bolt (Φfor 12.7-25.4mm), 1/4inch-20 U-bolt (Φfor 25.4-31.75mm), 1/4inch-20 Nylock nut, rubber cap, spacer
*A separate inch tool (7/16inch wrench) is required to install the U-shaped clamp.
*Please fix your smartphone with the attached tether (rubber band) to prevent it from falling off.
*Fix the mounted device with the attached tether band to prevent it from falling off.
*Do not operate or adjust the mounting object or the ram mount product while riding, as it is dangerous.
*We will not compensate for any damage caused by vibration or removal of the product during or after installation, or for any trouble caused by installation method or combination of parts without any defect in the Ram Mount product.
*In order to prevent unexpected breakage of parts, malfunctions, or accidental damage caused by deterioration of materials (including rust) due to use environment, aging, or wear and tear, always inspect the product before use and discontinue use or replace the product with a new one if any abnormality is found.
*There may be changes in product specifications due to the manufacturer's reasons.