Un kit de estancia para quitar el guardabarros trasero de fábrica e instalar la matrícula..
Además del kit convencional de Adio sin defensas, el Tipo 2 ya está disponible..
El Tipo 1 (modelo convencional) se caracterizaba por su número de estancia dividido entre los lados izquierdo y derecho, pero el Tipo 2 es simplemente un número de estancia desde el centro..
La placa de matrícula también está colocada en un ángulo más alto para acomodar vehículos con una distancia entre ejes más baja y más larga..
También es adecuado para bajar y Ronghui vehículos personalizados.
Este kit elimina las estancias laterales y simplemente instala la matrícula..
En comparación con el tipo 1 convencional, el ángulo de la placa de matrícula se establece más, y el kit sin guardabarros se puede utilizar para Ronghui y bajar el vehículo..
Tenemos mucho espacio entre la matrícula y el neumático trasero..
Sólo este tipo 2 puede ser usado con los kits de Adio de larga distancia entre ejes..
El kit convencional de Tipo 1 sin defensas no puede ser usado con el kit de distancia entre ejes larga..
La luz de la matrícula LED y el reflector permanecen incluidos. Se incluyen las luces de la matrícula LED, pero la delgada luz de la matrícula LED se incluye porque la protuberancia en la parte trasera del vehículo me molesta..
Esto le da al auto un estilo más picante sin importar el tamaño de la luz de la matrícula..
El soporte del reflector es de un tipo separado, por lo que puede instalar el reflector genuino, o también puede personalizar el reflector con otros reflectores..
También hay disponible un kit con un reflector delgado.
This kit is for removing the stock rear fender and installing the license plate.
In addition to the conventional Adio fender eliminator Kit, Type 2 is also available.
Type 2 has a simple license plate bracket from the center, whereas Type 1 has a license plate bracket from the left and right.
The angle of the license plate is set more low, so it can be used for vehicles with lowered or long wheelbase.
●Also compatible with low-down and long-wheel custom vehicles
This is a simple kit to install the license plate without side bracket.
This is a fender eliminator kit that has a more angled license plate compared to the conventional type (Type 1), and can be used for lowering the vehicle.
There is a lot of clearance between the license plate and the rear tire.
When ADIO long wheelbase kit is installed, only this type 2 can be installed.
The conventional Type 1 fender eliminator Kit cannot be installed together with the Long Wheel Base Kit.
●LED license plate light and the stock license plate light including reflector bracket are LED, but it sticks out from the back of the vehicle.
This gives the vehicle an even more race-like look without worrying about the size of the license plate lights.
In addition, the reflector bracket is a separate type, so it is possible to install a stock reflector and also to install an aftermarket reflector for customization.
A kit with slim reflector is also available.