Ligeramente redondeado, el diseño estándar del Bikini Bowl.
Puedes obtener un alto grado de rectificación y un estilo intrépido. Se puede montar en la luz normal con un perno..
Tres puntos de fijación segura se logran con monturas de goma a ambos lados de la luz y monturas rígidas inferiores..
El cuerpo de la capucha está hecho de FRP y equipado con una pantalla de policarbonato como estándar..
Puedes elegir entre dos tipos de pantallas: clara y fumada.
Road Comet
Una amplia gama y un diseño estándar de alta calidad de la minicapucha deportiva..
La forma ligeramente redondeada de la capucha del bikini puede instalarse en cualquier tipo de vehículo sin ninguna molestia y realza el atractivo del estilo original del vehículo..
También reduce la presión del viento desde los hombros hasta el cuerpo para que la conducción a alta velocidad sea más cómoda..
El cuerpo de la capucha tiene una construcción de varias capas de FRP para la durabilidad, y la parte posterior de la capucha tiene un acabado superficial mate..
Podemos pintar en colores domésticos genuinos con pintura de uretano acrílico..
La pantalla está disponible en versiones transparente y ahumada. Se utilizan tornillos de acero inoxidable duraderos, arandelas de policarbonato y tuercas de seguridad para fijar la pantalla al cuerpo de la capucha..
La instalación con tornillos es posible con un diseño especial para cada modelo de coche.
Las líneas de corte y los soportes de montaje están disponibles para cada modelo de coche y pueden ser instalados con tornillos..
No se requieren herramientas especiales para la instalación.
Y por supuesto, estamos disponibles para las inspecciones de vehículos..
Montaje de 3 puntos para una fijación segura
Los soportes de goma de los lados izquierdo y derecho y los soportes rígidos inferiores están fijados en su lugar para reducir las incómodas vibraciones y permitirle disfrutar de una conducción estable incluso a altas velocidades..
Todos los colores de la pintura de la fábrica están pintados claros y la parte trasera está pintada del mismo color..
Procedimiento de instalación
1
Por favor, revise el contenido antes de empezar a instalar la pieza..
capucha
pantalla
Manual de instrucciones, juego de soportes para la carrocería, juego de tornillos para la pantalla (azul)
2
Por favor, preparen las herramientas necesarias para la instalación..
Llaves combinadas o llaves, etc. (tamaño 14mm,13mm,12mm,10mm,8mm)
Llaves hexagonales (tamaño 4mm, 3mm)
Destornillador de cabeza Phillips
Mantas (para proteger la carrocería del coche)
Tijeras o pinzas
3
Ata la goma de montaje a la capucha..
Retire el collar e instale la goma de montaje e inserte el collar..
La goma de montaje se incluye en el juego de soportes de montaje de la carrocería del coche.
4
Ata la pantalla a la capucha..
Montar temporalmente los tornillos de la pantalla en todos los agujeros y luego apretarlos uniformemente..
Los tornillos de la pantalla están en el juego de tornillos de la pantalla (azul).
5
La contratuerca está diseñada para evitar que se afloje. Puedes comprobarla a mano para asegurarte de que está lo suficientemente apretada sin que se afloje..
No lo apriete demasiado, ya que puede deformar la pantalla o hacer que se agriete..
6
Quita los tornillos que sujetan el aro de luz en su lugar..
7
Saque el acoplador y retire la unidad de luz..
8
Retire los pernos que sujetan los faros en su lugar y reemplácelos por los pernos de montaje laterales suministrados..
Los pernos de montaje lateral están incluidos en el juego de soportes de montaje corporal.
9
Para evitar el desalineamiento del eje óptico, el trabajo se hace en un lado a la vez..
10
Inserte el acoplador e instale la unidad del faro en su lugar..
11
Apriete los tornillos izquierdo y derecho..
12
Arreglar temporalmente la estancia adjunta..
Lo uní de forma suelta para que los tirantes se puedan mover para ajustar la posición de la capucha más tarde..
13
Me pondré la capucha..
Alinear los agujeros de luz de la izquierda y la derecha con los agujeros de la capota de la derecha y la izquierda..
Los tirantes deben estar alineados con el interior del agujero en el fondo de la capucha..
14
Instale los pernos de ambos lados para fijar la capota en su lugar..
Los pernos izquierdo y derecho están incluidos en el juego de soportes de montaje en el cuerpo..
15
Alinee el agujero en la parte inferior de la capucha con el estay, y fíjelo temporalmente con el perno y la tuerca adjuntos..
16
Ajusta y posiciona el espacio alrededor del borde de la luz y las luces de la capota..
17
Apriete el perno en el lado del cuerpo de la estancia..
18
Apriete los pernos del lado de la capota..
19
Instalación completada.
Gire el manubrio a la izquierda y a la derecha para comprobar si hay interferencias..
This bikini cowl has a standard design with a slightly rounded shape.
High rectification effect and fearless styling can be obtained. Bolt-on installation to the stock lights.
The light is securely fixed in place with the rubber mounts on both sides of the light and the lower rigid mount.
The cowl body is made of FRP and comes standard with a polycarbonate screen.
The screen can be selected from clear or smoked.
Road Comet
Sporty mini cowl with standard design that boasts a wide lineup and high quality.
The slightly rounded shape of the bikini cowl can be installed on any type of vehicle without any discomfort and enhances the original styling of the vehicle.
It also reduces wind pressure from the shoulders to the torso to support comfortable high-speed driving.
The main body of the cowl is made of multi-layered FRP for durability, and the back side is finished with a surface matte finish.
The back of the cowl has a sapphire matte finish and can be painted with acrylic urethane paint in Japan.
The screen can be selected from clear or smoked, and is attached to the cowl body with highly durable stainless steel screws, polycarbonate washers and lock nuts.
Bolt-on installation is possible with the car-specific design
The cut lines and mounting brackets are set for each car model, and installation can be done by bolt-on.
No special tools are required for installation. No special tools are required for installation.
Secure fixation with 3-point mounting system
Rubber mounts on both sides and rigid mounts on the bottom provide secure fixation at 3 points to reduce unpleasant vibrations and provide stable driving even at high speeds.
All factory colors are clear coated, and the backside is also painted in the same color.
Installation Procedure
1
Please check the contents before installing the parts.
Cowl
Windshield
Instruction Manual, Body Mounting Bracket Set, Screen Screw Set (Blue)
2
Please prepare the tools necessary for installation.
Combination wrench or wrench (size 14mm, 13mm, 12mm, 10mm, 8mm)
Hexagonal wrench (size 4mm, 3mm)
Phillips screwdriver
Blanket (to protect the bike body)
Scissors or nippers
3
Install the mounting rubber to the cowl.
Once the inside collar is removed, insert the collar after the mounting rubber is installed.
The mounting rubber is included in the bike body mounting bracket set.
4
Install the screen to the cowl.
Terminally assemble the screen screws into all the holes and tighten them evenly.
Screen screws are included in the screen screw set (blue).
5
The lock nut is designed to prevent loosening, so it is sufficient to tighten it to the extent that there is no rattling after checking by hand.
Over-tightening may cause deformation or cracking of the screen.
6
Remove the screw that holds the light rim in place.
7
Unplug the coupler and remove the light unit.
8
Remove the bolts securing the headlight and replace them with the supplied side mount bolts.
The side mount bolts are included in the bike body mounting bracket set.
9
To prevent misalignment of the optical axis, work on one side at a time.
10
Insert the coupler and install the headlight unit in the original location.
11
Tighten the screws on both sides.
12
Tighten the included bracket.
Fasten the bracket temporarily, so that the cowl can be aligned later.
13. Put the cowl on.
Align the holes on the left and right sides of the light with the holes on the left and right sides of the cowl.
Align the brackets so that they are inside the holes at the bottom of the cowl.
14
Install the bolts on both sides to secure the cowl.
The left and right bolts are included in the body mounting bracket set.
15
Align the holes on the bottom of the cowl with the brackets, and temporarily fix with the bolts and nuts provided.
16
Adjust the clearance between the light rim and the cowl around the light to set the position.
17
Fasten the bolts on the body side of the bracket.
18
Fasten the bolts on the cowl side.
19
Installation is complete.
Turn the handlebars to the left and right to check for interference.