[Especificaciones del silenciador]
cambio de aceite : círculo (por ejemplo, de amigos)
Reemplazo de elementos : círculo (por ejemplo, de amigos)
paso normal : círculo (por ejemplo, de amigos)
paso en tándem : círculo (por ejemplo, de amigos)
la posición del centro : círculo (por ejemplo, de amigos)
método establecido : 4-1
Diámetro del tubo de escape : Aprox. 42,7 mm de diámetro
El diámetro del tubo de cola : Aproximadamente 60,5 mm de diámetro
toques finales... : Titanio puro
[especificaciones del silenciador]
toques finales... : SBL-B (con quemado delantero y trasero)
peso : Aprox. 4,5 kg
Soporte para el sensor de O2
Se puede equipar con el soporte central opcional de fábrica de Kawasaki..
[Accesorios]
Brida de escape exclusiva (anodizada en plata)
primavera
Placa de transferencia de paso en tándem
Goma para la banda/banda del silenciador
Emblema (Grande)
*La imagen puede contener otros tipos.
*Silenciadores de titanio puro de los silenciadores CLR. Esto es inevitable debido a la especificación del titanio puro, y también es la textura del titanio puro. Si tienes un acabado pulido o un acabado bruñido, se notarán menos, así que si esto es una preocupación, por favor selecciona esa opción.
*Tenga en cuenta que las especificaciones del producto pueden estar sujetas a cambios debido a la conveniencia del fabricante. Por favor, entiéndelo.
[Exhaust Specification]
Oil change: Available
Element replacement: Available
Stock step: Available
Pillion step: Available
Center stand: Available
Assembly method: 4-1
Exhaust pipe Diameter: About Φ42.7
Tail pipe diameter: Approx. Φ60.5
Finish: Pure Titanium
[Silencer Specification]
Finish: SBL-B (with front and rear heated coloring)
Weight: Approx. 4.5kg
O2 sensor compatible
Can be fitted with KAWASAKI's optional center stand.
[Components]
・Special exhaust flange (Silver anodized)
・Spring
・Pillion step moving plate
・Silencer band / rubber for band
・Emblem (Large)
*The image may contain other types.
*About the pure titanium of the CLR exhaust, the pattern of the fabric at the time of the pipe manufacturing, a small wound, etc. have individual differences, but there is a little conspicuous one.Please note that this is an unavoidable thing on the specification of pure titanium, and is also a texture of pure titanium.The buffed and heat-coloring finishes are less noticeable, so if you are concerned about them, please choose that one.
*There may be changes in product specifications due to the manufacturer's reasons.