[Color]
Stealth Black
[Especificaciones]
Desplazamiento : 124cc
Con la célula
Los interruptores izquierdo y derecho
Embrague manual de 4 velocidades (patrón de cambio 1-N-2-3-4)
[Accesorios (para los monos)]
Pedalea.
Pedal de cambio
colector
Enfriador de aceite
Carburador (Φ22)
Tanque de recogida de petróleo
Piñón impulsado (29T)
Soporte del acelerador
Los interruptores izquierdo y derecho
Puños izquierdo y derecho
Alambre de embrague
Alambre del acelerador
・CDI
regulador
El relé de la señal de giro
Bobina de ignición
relé de arranque
Arnés principal
*Si su vehículo no está equipado con un arrancador de celda, por favor prepare un interruptor de arranque separado.
*El colector adjunto es para los carbohidratos [ca30.ca31] vendidos por Tanaka Shokai. No se puede usar para el carburador de reserva.
*El colector adjunto es para los monos. Algunos vehículos (como los chasis y los cubos) pueden necesitar modificaciones.
*En el caso de los vehículos de 12v, se puede utilizar el arnés estándar, pero hay que sustituir el acoplador del motor al terminal Giboshiki.
*Si quieres instalarlo en un vehículo de 6v, es muy conveniente usar el arnés de conversión del motor [ca885]12v. (No tienes que cambiar los arneses porque puedes usar el genuino arnés 6v.)
*En el caso de un vehículo de 6v, es necesario reemplazar la batería, las válvulas y otras partes eléctricas por 12v.
*Cuando montas la moto en el chasis, el cuadro interfiere con la moto, así que tienes que cortar las partes que interfieren.
*Independientemente de la elección del arnés, el conjunto consiste en las partes del mono.
[Color]
・Stealth black
[Specification]
・Displacement: 124cc
・With cell-starter
・Left / Right switch
・Manual clutch 4-speed (shift pattern 1-N-2-3-4)
・Decompression kit: Without
[Components (for MONKEY)]
・Kick Pedal
・Shift pedal
・Manifold
Oil cooler
・Carburetor (Φ22)
・Oil catch tank
・Rear sprocket (29T)
・Throttle holder
・Left / Right switch
・Right and left grips
・Clutch wire
・Throttle wire
・CDI
・Regulators
・Blinker relay
・Ignition coil
・Starter relay
・Main harness (Please choose one from the options)
*The attached manifold is for the carburetor sold by Tanaka Trading [ca30, ca31].It cannot be used with stock carburetor.
*The supplied manifold is for Monkey.Some vehicles (CHALY, CUB, etc.) may require modification and may not fit.
*For 12v vehicles, the stock harness can be used, but the coupler for the engine connection must be replaced with a crimp terminal.
*When installing on a 6V Vehicle, the [ca885] 12V engine replacement harness is very convenient.(The 6v stock harness can be used, so there is no need to change the harness)
*When installing on a 6V bike, it is necessary to convert the electrical system such as battery and valve to 12V.
*When you install it on CHALY, you need to cut the interfering part because it interferes with the frame.
*Regardless of the harness selection, the set contents are parts for Monkey.
*If the breather pipe of the engine body is installed between frames, the pressure inside the crankcase will increase and oil will leak out, which is very dangerous.Check the condition of the breather pipe after engine installation before starting the engine.
*Since the included switches cannot be used with the coupler on the Cub's harness, wiring modification is required.
*As this is a set product combined with the accompanying harness, wiring modifications may be necessary.
*Tanaka Trading does not exchange products after shipment.Please check the engine model carefully before purchasing.
*The sprocket attached to the engine is for checking the engine start.Sprockets are not replaced.
*There may be changes in product specifications due to the manufacturer's reasons.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.