desplazamiento (de un vehículo) : 86cc
Embrague manual de 4 velocidades (patrón de cambio 1-N-2-3-4)
[Accesorios (para los monos)]
Pedalea.
Pedal de cambio
Carburador (φ16)
colector
・CDI
regulador
El relé de la señal de giro
Bobina de ignición
Arnés principal
*En el caso de los vehículos de 12v, se puede utilizar el arnés estándar, pero hay que sustituir el acoplador del motor al terminal Giboshiki.
*Si quieres instalarlo en un vehículo de 6v, es muy conveniente usar el arnés de conversión del motor [ca885]12v. (No tienes que cambiar los arneses porque puedes usar el genuino arnés 6v.)
*En el caso de un vehículo de 6v, es necesario reemplazar la batería, las válvulas y otras partes eléctricas por 12v.
*El colector adjunto es para los monos. Algunos vehículos (como los chasis y los cubos) pueden necesitar modificaciones.
*Independientemente de la elección del arnés, el conjunto consiste en las partes del mono.
[Specification]
・Displacement: 86cc
・Manual clutch 4-speed (shift pattern 1-N-2-3-4)
[Components (for MONKEY)]
・Kick Pedal
・Shift pedal
・Carburetor (Φ16)
・Manifold
・CDI
・Regulators
・Blinker relay
・Ignition coil
・Main harness (Please choose one from the options)
*Regardless of the harness selection, the set contents are parts for Monkey.
*For 12v vehicles, the stock harness can be used, but the coupler for the engine connection must be replaced with a crimp terminal.
*When installing on a 6V Vehicle (part number: ca885)12v engine conversion harness is very useful.(The 6v stock harness can be used, so there is no need to change the harness)
*When installing on a 6V bike, it is necessary to convert the electrical system such as battery and valve to 12V.
*The attached manifold is for Monkey, so some vehicles (Shari, Cub, etc.) may require modification and may not fit.
*If the breather pipe of the engine body is installed between frames, the pressure inside the crankcase will increase and oil will leak out, which is very dangerous.Check the condition of the breather pipe after engine installation before starting the engine.
*Tanaka Trading does not exchange products after shipment.Please check the engine model carefully before purchasing.
*The sprocket attached to the engine is for checking the engine start.Sprockets are not replaced.
*There may be changes in product specifications due to the manufacturer's reasons.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.