[Fuente] fuera de : Gunmetal Poliéster OX250 Denier dentro de : Encaje de poliéster en la parte superior frontal dentro de : La Negra Ancha Atrás
[Tamaño. : L Supersport] longitud total... : 215/toda la altura : 125/Ancho total : 100/altura de la cola : 115/Anchura trasera arriba : 60/bajo la anchura trasera : 50cm)
*Ya no viene con un gran cinturón mágico y un gancho S en la espalda. *La imagen 3 es una imagen de una estructura dúplex. *La imagen 4 es una imagen de la parte interior. Normalmente, no es posible dividir la parte interna y la externa. *El Ninja H2 también está disponible con una media cubierta interior especial "Takumi Micro Queen" (hecha por encargo).
[Material] Outside: Gunmetal Polyester OX 250 Denier Inside: Front upper polyester pan lace Inside: Backward Black Broad
[Size: L Super Sport] Full Length: 215 / Height: 125 / width: 100/tail height: 115/over rear width: 60/ Lower rear width: 50cm)
*The large magic belt and S-hooks at the rear have been removed. *Image 3 is an image of a duplex structure. *Image 4 is an image of innerwear.Normally, it is not able to be divided the outside and inside. *Ninja H2 has been tested but we do not guarantee the integrity of the exterior.Takumi Micro Queen" is also available for Ninja H2. *There may be changes in product specifications due to the manufacturer's reasons.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
* Este producto será hecha después de una orden, dentro de los términos de tiempo del envío currect después de que recibamos un pedido.
* Este artículo no se puede cancelar, ni volvió intercambio después de realizar un pedido.
* La imagen es solo como referencia. La imagen mostrada puede diferir del producto real.
*¡Alineación de la versión 2 de la cubierta de la bicicleta de Takumi! ¡Takumi Bike Cover, la principal marca de fundas para motos, ha sido renovada!. Las especificaciones populares del modelo anterior se han mantenido y mejorado..
Bike Cover Takumi es una estructura única de doble capa. Para proteger la bicicleta de la lluvia, el viento, el polvo y los rayos UV, la cubierta se fabrica por separado del exterior y del interior, y cada parte está hecha con materiales de la más alta calidad.. Cada una de ellas tiene su propio drapeado tridimensional y se realiza con el tiempo y esfuerzo de dos cubiertas estándar.. La prenda exterior está recubierta de metal de cañón para prevenir la degradación debido a los rayos UV, y está terminada con doble costura para reducir la entrada de agua y aumentar la resistencia de las costuras.. Cada parte de la ropa interior está hecha de un material de alta resistencia al calor para reducir el desgaste de la bicicleta.. Este es el excelente producto hecho por el artesano para cumplir con los requisitos de la cubierta de la bicicleta a un alto nivel como la usabilidad y la adaptación para el uso diario..
Doble costura para reducir la entrada de agua de lluvia. Cinturón central cubierto con material resistente al calor. Rejillas de ventilación para una mejor ventilación.. Hebilla de cinturón a prueba de golpes. Una gran cerradura fácil de usar. Codificación de color para una fácil distinción. Soporte de cordón. Delantero/2, trasero/1 mango. Huso a prueba de pérdidas.
[Cambios del modelo anterior] El nombre de la marca se cambió de MCP a Takumi. Una bolsa de almacenamiento híbrida de malla y tafetán El cinturón central fue cambiado a una versión resistente al calor.. Doble costura en lugar de una sola para reducir la intrusión de agua de lluvia.. Se han añadido dos asas frontales superiores para facilitar su extracción.. Dos asas delanteras y una trasera, cambiadas a material resistente a los rayos UV Los tamaños Off-Level y Off-LL se cambian a LH y LLH.. Tamaño adicional para la clase de aventura. *La lata S de acero inoxidable ya no está incluida.
Material del cuerpo: Exterior Cubierta exterior de bronce de cañón, poliéster OX250 denier.. Resistencia a los rayos UV y alta durabilidad.
Material del cuerpo: Interior trasero La ropa interior negra está hecha de un material especial resistente al calor llamado "Broad".. Es seguro tocar el motor, el silenciador, etc. después de que el vehículo se haya detenido..
Material del cuerpo: Parte superior delantera interior El encaje de poliéster blando se utiliza para la pantalla y el área del manubrio en la parte superior frontal..
Costura: Doble costura Toda la costura es de doble costura y doble costura para aumentar la fuerza y reducir las inundaciones..
Cinturón central Cinturón inastillable. Se puede unir y separar de cualquier lado.... Advance Inner Material, que también se utiliza en Takumi Advance, se utiliza. El calor del silenciador no lo derretirá..
Doble cara: hebilla Campana y ajustador en el cinturón central inastillable. Una estructura fuertemente tensada y no floja. Equipado en ambos lados.
Maneje Dos cómodas asas en la parte delantera y una en la parte trasera para un fácil manejo.. Utiliza un material que es resistente a la degradación de los rayos UV.
El Rock Hall Agujeros de cierre en la parte delantera y trasera para los dispositivos de seguridad. El frente/amarillo y la parte trasera/negro están codificados por colores para facilitar la identificación del frente y la parte trasera cuando se instala la cubierta..
Doble: Stopper◆ Los cordones de apertura delanteros y traseros. Se utiliza en productos reales para el exterior y tiene un doble tapón para soportar vientos fuertes..
Aire: Ventilación Venturi de aire en ambos lados. Esto es para evitar la acumulación de humedad en el interior y para evitar que se produzca la oxidación..
La cola: Mark. Compromiso con la facilidad de uso en la vida diaria. Sólo el panel trasero es negro, y las marcas de identificación delanteras y traseras se utilizan para identificar la parte delantera y trasera del vehículo..
Bolsa de almacenamiento Se incluye una bolsa de almacenamiento dedicada.. Fácil de usar incluso cuando la cubierta está húmeda con un material de malla transpirable.
Cubierta de bicicleta para proteger su coche! Webike TV] ↓
★Takumi Bike Cover Version 2 Lineup! Takumi Bike Cover, a top brand of motorcycle covers, has been renewed. The specifications that have been popular in the previous models have been maintained, and the functions have been further improved.
Takumi motorcycle cover has a unique double-layered structure. In order to protect the bike from rain, wind, dust and ultraviolet rays, the cover is manufactured separately on the outside and inside, and the highest quality materials are used for each part. Each of them is manufactured with a unique three-dimensional cutting method, which requires the same amount of time and effort as two regular covers. The outer is coated with gunmetal to prevent deterioration due to ultraviolet rays, and is finished with double sewing to reduce water penetration and increase the sewing strength of the joints. Each part of the inner lining is made of a material that reduces scratches on the bike and has high heat resistance. This is an excellent product made by craftsmen to meet the requirements of motorcycle covers such as daily usability and fitting at a high level.
・Double seams to reduce rainwater penetration. ・Center belt covered with heat-resistant material. ・Air vents for better ventilation. ・Anti-loose belt buckle. ・Large, easy-to-use locking holes. ・Color-coded for easy identification. ・Drawcord holder. ・Front / 2, Rear / 1 handles. ・Spindle with anti-loosening structure.
[Changes from previous model] ○Changed the brand name from MCP to Craftman. ○The storage bag is made of a hybrid of mesh and taffeta ○Changed the center belt to a heat-resistant specification. ○The sewing was changed from single stitch to double stitch, reducing the intrusion of rainwater. ○The handle of the upper part of the front is increased to two places, and it became easy to remove.Changed to a material that is resistant to UV degradation, with two handles on the front side and one on the back. ○Changed the size notation of "Off L" and "Off LL" to "LH" and "LLH". ○Added the size of the adventure class. *The stainless steel S-can is no longer included
◆Body material: Outer◆ The gunmetal outer shell is "polyester OX250 denier".It is UV resistant and highly durable.
◆Body material: Rear inner side◆ The black inner lining is made of "Broad", a special material that is resistant to heat.It is safe to touch the engine and exhaust after stopping the vehicle.
◆Body material: Medial anterior upper◆ On the upper front side of the inner body, the windshield and handlebars are protected by a soft material called "polyester pan lace".
◆Sewing: double-stitched◆ In order to increase the strength and reduce water penetration, all sewing is double stitched and double sewn.
◆Center belt◆ Shatterproof belt. It can be removed from either side.Adopt the advance inner material also used in Takumi advance.It will not melt even under the heat of a exhaust.
◆Double-sided: buckle◆ Bell and adjuster on shatterproof center belt. The structure is strong in tension and does not sag easily.Equipped on both sides.
◆Handle◆ Two handles on the front and one handle on the back for easy operation.UV-resistant material is used.
◆Rock Hall◆ Front and rear lock holes for security equipment.The front / yellow and back / black color coding makes it easy to identify the front and rear when the cover is installed.
◆Double: Stopper◆ Tie cords at front and back.The double stopper is used for authentic outdoor products and can withstand strong winds.
◆Air: Bent◆ Air vent on both sides.This is a device to prevent moisture from accumulating inside and to suppress the occurrence of rust.
◆Tail: Mark◆ A commitment to ease of use in everyday life.Only the rear panel is black to identify the front and rear of the vehicle.
◆Storage bag◆ It comes with its own storage bag.Breathable mesh material, easy to use even when the cover itself is damp.
outline Motorcycle Cover with high protection performance.
Reason for purchase I was looking for a Motorcycle Cover that would not scratch my Motorcycle and I found this product.
Appearance etc. Included in the box is a Motorcycle Cover, a bag to hold the Motorcycle Cover, and a fixed Belt. The inside was not a crumbly fabric, but a soft fabric was used for the parts that touch the Motorcycle, and it felt like a double layer with the outside fabric.
how to use The basic method of hanging the cover would be the same as a regular Motorcycle Cover. Hang the cover from the rear side, and then hang the front side. After that, there is a front and rear drawstring, so pull the string and draw it down.
Impression used I have been using it for about six months without any scratches on the Motorcycle, so I have the impression that the soft inner fabric is working well. Compared to cheap Motorcycle Covers, the thickness and Material of the fabric is obviously different, so you can tell that they are made of good stuff. I wonder if the fabric of the exhaust system part is heat resistant to some extent, since it does not melt due to the heat of the exhaust system even if it is applied immediately after use. Since the size is just right, the front part of the Motorcycle Cover seems to be slightly caught on the Mirror when removing/attaching it, so it may require some hang to hang it. When it rains, water leaks through the joints and the inside gets very wet and stuffy. It is better to put tape on the joints, etc. by yourself. Durability is unknown, but the underside of the fabric looks a bit weathered, but not to the extent that it affects functionality.
Improvements It is scratch-resistant, but leaks badly from the joints, so I don't think it is a good enough product to be called a masterpiece.View Detail
I bought it again at Timing for a Motorcycle replacement. My previous Cover also used Takumi, and I think I used it for about 10 years. I used a number of covers before I got to this Takumi Cover. Many of them were cheap and tore the Cover in a year, and many of them were not original. However, while the Cover is a bit pricey, it is very durable. If it's a long-running motorcycle, it's worth the initial investment, but it's well worth the price. View Detail
I was using the Cover that was used for the previous vehicle so far, but because it became noticeable as dirt and tear, it decided to replace. This time, I emphasized on replacing scratches on vehicles etc. when hanging Cover etc.. It is hard to enter. In various colors, TAKUMI Bike Cover used different materials for Inner and Outer, so the Wound seemed to be entering and I made it the first candidate. The problem is that the price is a bit high. The second option is to purchase the Inner cover, and then multiply the Cover that you used until then. Although this is cheap, it is necessary to hang two pieces of Inner and Outer each time. Also, as the Outer will remain ragged look like it is, he decided to go with the first candidate quietly. TAKUMI Bike Cover arrived has good touch, Inner which seems not to enter Wound in the vehicle and relatively thicker Outer are united and it seems to protect the vehicle firmly. I purchased this time "LSUPER SPORTS 750" Size is relatively large pattern F4R in SSClass It is ExactlySize so it seems that other SSClass can be used without problems. Also, Mirror part and car body Rear are equipped with handlebar as a handle, Velcro which can fix Draw cord is attached and it is made to reach the itchy place. Although the absolute price is high, considering that it covers the large motorcycle, it is satisfactory to say that it can be said to be Reasonable because it is still good with details even with Inner and Outer two pieces.View Detail
Por favor, seleccione la opción antes de añadir a su carrito.
WHY
?
THE LARGEST SHOP IN JAPAN
EXCLUSIVE COUPONS, SALE, DEALS
FAST, RELIABLE SHIPPING
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!