escriba : ST-2M
[Especificaciones del árbol de levas]
MAX LIFT(mm) : IN 6.5/EX 6.5
1mm DURACIÓN (grados) : IN 250/EX 250
Distancia estándar del taqué (mm) : IN 0.08-0.12/EX 0.08-0.12
*1 Asegúrese de medir y ajustar la holgura del taqué y la sincronización de la válvula en el momento de la instalación.
Para más información sobre la medición y el ajuste de la sincronización de la válvula y la holgura del taqué, por favor consulte la sección "4º Mini mundo" de la página web de Yoshimura Japón.
http:://yoshimura-jp.com/special/4st-mini/pdf/valve-timing.pdf
*2 Para poder utilizar este producto, debe utilizar BAZZAZ para ajustar el nivel de combustible. Sin el ajuste de combustible, este producto no puede mostrar su rendimiento original.
Puede consultar el mapa recomendado de BAZZAZ en el manual de instrucciones para ajustar el nivel de combustible.
*Sólo curso cerrado.
*Para el C125, tendrás que ajustar el nivel de combustible del C125 ya que no hay ninguna opción de BAZZAZ disponible.
Type: ST-2M
[camshaft specifications]
MAX LIFT(mm):IN 6.5 / EX 6.5
1mm DURATION(degree):IN 250 / EX 250
Standard tappet clearance (mm):IN 0.08-0.12/EX 0.08-0.12
*1 Be sure to measure and adjust the tappet clearance and valve timing before installation.
For more information about "Yoshimura's Tappet Clearance and Valve Timing Measurement and Adjustment", please refer to "4st Mini world" on Yoshimura Japan website.
http:://yoshimura-jp.com/special/4st-mini/pdf/valve-timing.pdf
*2 When using this product, please be sure to adjust the fuel using BAZZAZ.If you don't adjust the fuel, you can't get the best performance.
Please refer to the BAZZAZ recommended map in the instruction manual for fuel adjustment.
*This part is for the closed circuit only.
*BAZZAZ is not available for C125, so it is necessary to adjust the fuel by other products.