material : acero inoxidable
El tamaño. : M6XP1.0
A : 6.9mm
B : 13mm
C : 10mm
capacidad : Dos.
*Se debe aplicar grasa o agente antiadherente a los hilos antes de usarlos.
*La longitud de la protuberancia del cerrojo debe estar de 1 a 5 mm de la cerradura.
*No debe utilizarse para las piezas en las que se requiere resistencia debido a su baja altura y al reducido número de hilos.
*E-LOCK NUT es una marca registrada de Osaka Forming Co.
Material: Stainless steel
Size: M6 x P1.0
A: 6.9mm
B: 13mm
C: 10mm
Quantity: 2pcs.
*Because of the nature of the material, it is easy to cause seizure, please apply grease or anti-seizure agent to the screw threads before use.
*Please make sure that the bolt protrudes about 1 to 5 mm from the locking part, and make sure that the thread and locking part of the bolt and nut are not damaged before reuse.
*Because the height is low and the number of threads is small, do not use this product in areas where strength is required.
*K-CON lock nut is made of E-LOCK NUT of Osaka Forming Co.E-LOCK NUT is a registered trademark of Osaka Forming Co.