escriba : Pinzas Miller M10
accesorio : Cable de extensión de 1200mm, 2 llaves
La izquierda y la derecha pueden ser montadas
*Algunas de las imágenes que se muestran en el ejemplo de instalación incluyen productos que no son manejados por DAYTONA. Por favor, reconózcalo de antemano.
*Este producto está destinado a disuadir el robo y las travesuras y no garantiza una protección completa contra el robo. Se recomienda utilizar este producto con otros productos antirrobo.
*Tenga en cuenta que no somos responsables de ningún daño, pérdida, robo o rotura de este producto.
*Por favor, tenga cuidado de no perder sus llaves, ya que no hay reparación sólo para las llaves. (Se incluyen 2 llaves)
*Si la llave no funciona bien debido a la lluvia, debe usar lubricantes para mantener la llave.
*Compatible con el espejo tipo barra M10. (*También es compatible con el espejo tipo rebaba M8 con la compra de la arandela de rebaba (78032).
*Hay 2 posiciones para elegir dependiendo de la dirección del portador del casco. (*Algunos modelos sólo permiten usar una posición)
*Diseño simétrico.
*Cable de extensión de 1200 mm incluido. Puede evitar el robo de la chaqueta pasándola por la chaqueta que se ha quitado o cuando no pueda alcanzar el casco.
*Este producto no está disponible para vehículos como los scooters, en los que la superficie de montaje del espejo es más baja que la superficie de la capota.
*El MT-09 es sólo el lado derecho y necesita ser girado junto con los espejos en el momento de la instalación.
*Algunas imágenes son GSX-S1000.
*Se requiere el adaptador de espejo (99784/99785) con dispositivo de absorción de impactos. (*Quita la volteadora.)
*Tenga en cuenta que las especificaciones del producto pueden estar sujetas a cambios debido a la conveniencia del fabricante. Por favor, entiéndelo.
Type: Mirror M10 Clamp
Components: Extension wire cord 1200mm, 2 keys
This product can be mounted on right or left
*Some of the images of the installation examples include items that are not handled by DAYTONA.
*This product is intended to inhibit theft and mischief, and does not guarantee complete theft protection.It is recommended to use with other anti-theft products.
*We do not guarantee any theft, loss, dropout, damage or failure of the items attached to this product.
*Please be careful not to lose the key as it is not available for repair.(2 keys included)
*If the key does not work smoothly due to rain or other factors, use a lubricant to maintain it.
*Compatible with bar type mirror M10.(*Bar type mirror M8 is also available by purchasing Bar Ring Washer (78032) separately)
*Two positions can be selected by mounting direction of the helmet holder body.(*On some models, only one position can be used)
*Symmetrical design, may fit both left and right depending on the model.
*Extension wire cord 1200mm included.If the helmet is out of reach or the jacket is removed, you can not prevent the theft of the jacket.
*This product cannot be installed on scooters and other vehicles where the mounting surface of the mirror is lower than the cowl surface.
*On MT-09, right side only, it is necessary to turn together with the mirror when installing.
*Some images show GSX-S1000.
*The mirror adapter with shock absorber (99784 / 99785) must be installed at the same time.(*Turners are also to be removed.)
*There may be changes in product specifications due to the manufacturer's reasons.