[Lanzamiento de la pelota]
El centro del carburador - el centro del agujero es de unos 80mm
[Dimensiones/Especificaciones]
・160mmX105mm
La parte del agujero de 45 pasteles
Sistema seco
[Establecer el contenido]
POWERPOD cuerpo x 1pc
*Este producto está hecho de uretano ignífugo, sin embargo, puede arder si se filtra gasolina de desbordamiento en él o si se produce un retroceso con frecuencia. Por favor, asegúrese de que el carburador está en buenas condiciones antes de usar este producto.
*No lo use en días de lluvia ya que el uretano se obstruirá con agua.
*Por favor, límpiela regularmente para evitar que se atasque. Puedes lavarlo con un detergente casero normal. Por favor, no use disolventes ácidos fuertes.
*Puede ser deformado al principio, pero volverá a su forma original después de algún tiempo.
*Uno de ellos cubrirá dos cilindros. Necesitarás dos para un coche de cuatro cilindros.
*Puede romperse si se instala a la fuerza.
*Habrá decoloración a lo largo de la superficie ondulada del uretano en forma de líneas. Si te molesta, usa un marcador negro para difuminar la decoloración.
[***Hallazgos***]
He estado corriendo CR26 en una tienda de CHERRY durante unos 20 km y no puedo sentir ninguna resistencia. Aunque suelo utilizar el ajuste más grueso, no he encontrado ningún síntoma (estancamiento, lentitud de la rotación, etc.).
[Compatible pitches]
・The center of the hole of the carburetor is approx. 80mm
[dimensions and specifications]
・160mm x 105mm
・Hole part 45Ф
・Dry type
[Set components]
・POWERPOD main unit x 1pc
*This product is made of flame-retardant urethane, but there is a risk of burning if overflowed gasoline seeps in or if the product is frequently backfired.Please make sure that the carburetor is in good condition before use.
*Do not use on rainy days as the urethane will become clogged with water.
*Please clean regularly to prevent clogging due to dirt.You can wash it with ordinary household detergent.However, do not use strong acidic solvents.
*It may be deformed when you first receive it, but it will return after a while.
*This covers two cylinders with one unit.Two are required for four-cylinder vehicles.
*The product may tear if it is installed with excessive force.
*There is a linear discoloration along the crimped surface of the urethane.If it bothers you, please blur it with a black magic marker.
[**For your information**]
During 20km riding on CR26, there is no intake troubles.The setting was strong as usual, but there was no ignition troubles (such as engine stopping and rotation slowing).