- bought this OEM bolt when I needed to do work on my tdub engine.TDUB ,The flywheel is mounted onto the tapered end of the crankshaft. It is secured from rotating with a Woodruff key, and is tightened ...Lee mas
- Great exactly what I need for fjr. It smells like an old item but its well oiled & kept. Parcel came in very well packed too though delivery took some time.Lee mas
- [How is it used?TZr250R (3XV) I used it to remove the Flywheel from the generator inThere are cheaper MagnetPullers made in China, but I chose this product because it is an OEM Product, which is menti...Lee mas
- 1KT (TZr250) I used it in the I used the Universal Product one before, but it didn't come off well and the tool lost, so I bought the OEM Product. It was easy to use and came off easily with the OEM t...Lee mas
- It's an OEM tool and I had no problems working with it.Lee mas
- OEM tool with low price and reliable.There is a similar tool made in C country, but the price is not so different and the reliability is much different, so there is no Merit to challenge.I think it's ...Lee mas
- YAMAHA OEM steering nut wrench. I bought a key for the steering gear in YAMAHA YZF R1 RN12 05 from you. The key for the steering gear helps me a lot. Repeatedly disassembled the steering gear, so as...Lee mas
- I used to use a cheap cross-type universal puller from CHINAI couldn't get the Flywheel out of the Universal Puller, so I had to try it out I bought the OEM tool and it came off easilyIt is easy to ap...Lee mas
- YB-1 (2st) It's a special tool for Casting Iron, so I used it to remove and install the exhaust system on my The size was perfect and felt comfortable in my hand Since it is an universal tool, it is h...Lee mas
- Hook wrenches are hard to use if the size doesn't fit, but the WR250R's I bought it because it was recommended in the Service Manual for maintenance and because it was recommended in the Service Manua...Lee mas
- I want to share a review of the key I recently acquired. I had a problem with driving a motorcycle. As it turned out, a preload of the steering mechanism was required. But for this you need a social k...Lee mas
- I have long thought to buy a key like this, but I could not find it ... I found it, but it's not that. And finally found it! I bought this key specifically for the helmsman for the Yamaha R1 2005. And...Lee mas
- YAMAHAYamahaY's Gear is YAMAHA OEM Magnet Puller. TZr250 (1KT) I used it to remove the Magnet rotor. Screwed in the magnet rotor and turned, it was easy to disengage with a buzzing sound. This is ...Lee mas
- Since it is a Yamaha original manufacturer's product, it is satisfactory at all with a natural thing.
Lee mas - It was used at the time of engine decomposition of YAMAHA TW200, 236. If there isn't this, I think it is probably impossible to remove a rotor. It is not too bad, not too good, on the characteristic o...Lee mas
- Since between a muffler and oil filters was narrow as for XJR400, other manufacturers' thing did not suit. Then, this was also useless although this original manufacturer's product was purchased. Left...Lee mas
- It will not start, if there is this [ no ] in removing a flywheel. The direction in which especially a skid base is opened is indispensable. In a pure tool, I think that there is no loss even if it ha...Lee mas
- It purchased in order to form TT350 into 12V. Although attachment is needed for removing a magnet, pure attachment is phaseout, and it is ASE just for a moment. The bolt which is fixing the step after...Lee mas
- When removing the flywheel of a dynamo part, it could never remove at first, and did not understand why it would be good, but was completely at a loss quite. It is a scale from eyes that there is such...Lee mas
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING