- Encaja:
- SUZUKI GSX1400 01-08
More than impressed, these wheels are perfect, in every way. Almost too good for a roadbike, but absolutely made up I bought them.
Very happy.Lee mas - Encaja:
- SUZUKI GSX1300R Falcon -07
- SUZUKI
This nut with the KOOD front axle ist 230 gr. heavier than OEM! Together with shipping and tax to Germany it is really expensive.
Processing and finish is 1a.
Weight could be saved if the front axle w...Lee mas - Pivot ShaftPor KOODEncaja:
- SUZUKI GSX1400 01-06 K1-K6
precise processing, stunning finisch, only 20 gr heavier than OEM but with shipping an tax to Germany too expensive for a "nice to have item" Lee mas - Encaja:
- SUZUKI GSX1400 STD Fork [Application] Front axle shaft (use STD nut)
precise processing , stunning finish, 100 gr. heavier than OEM.
with shipping and tax to Germany too expensive for a "nice to have item" Lee mas - Rear ShockPor RFYEncaja:
- SUZUKI
Rear suspension at this price?This is the only choice for the poor rider, as other external products are expensive across the board.It's not a bad product as long as you don't pay attention to the tex...Lee mas - Encaja:
- HONDA 400X 13-15 NC47
- HONDA CB1000 SF (Big One) 92-98 SC30
- HONDA CB1100 10-21 SC65
- HONDA CB1100 EX 10-21 SC65
- HONDA CB1100 RS 17-21 SC65
- ...y más.
Is it good that it's so easy to install? It's easy to install.Lee mas - Encaja:
- HONDA 400X 13-15 NC47
- HONDA CB1000 SF (Big One) 92-98 SC30
- HONDA CB1100 10-21 SC65
- HONDA CB1100 EX 10-21 SC65
- HONDA CB1100 RS 17-21 SC65
- ...y más.
I replaced the rubber of NORMAL because it was worn out.I loved the look and feel of the hosel.Lee mas - Encaja:
- SUZUKI GSX1400 01-06
I put it in while I was at FFork O/H.As for the feeling of use, Smaller vibration is transmitted to the Handlebar from the NORMAL time. 。 It's not uncomfortable, but it might bother you if you are lon...Lee mas - Encaja:
- SUZUKI GSX1400 01-07
I liked the NORMAL quite a bit, but I was fortunate enough to get it for cheap, so I installed it."OHLINS on GSX1400 I can't deny that I felt like it was a bit too standard, but...In fact, people with...Lee mas - Encaja:
- SUZUKI Gixxer 150. 20-21 ED13N
- KAWASAKI Ninja250 18-22 EX250P
- KAWASAKI Z250 19-22 EX250P
- KAWASAKI Ninja ZX-25R SE 21-22 ZX250E
- HONDA CBR600RR 03-12 PC37/40
- ...y más.
I bought this product that says it's compatible with the CB1100RS (2020 model) to install it on my CB1100RS. Because the bend position of OEM and Spring is different, it was not possible to install in...Lee mas - Encaja:
- HONDA CB1000 SF (Big One) 92-97 SC30
- HONDA CB1300 SF 98-02 SC40
- HONDA CB1300 SF 03-08 SC54
- HONDA CB1300SUPER BOLDOR 03-08 SC54
- HONDA CB400SF 99-08 V Revo NC39
- ...y más.
I bent the footpeg when I stood up and mangled it, so I replaced itIt is installation in CB400SB of 2012 MODELThe shape is slightly shorter on the Knee Slider, but the rest is the same look as the OEM...Lee mas - Encaja:
- HONDA CB1000 SF (Big One) 92-97 SC30
- HONDA CB1300 SF 98-02 SC40
- HONDA CB1300 SF 03-08 SC54
- HONDA CB1300SUPER BOLDOR 03-08 SC54
- HONDA CB400SF 99-08 V Revo NC39
- ...y más.
It was listed as inspected, but the knee slider is wobbly!Either the Screw hole was thicker or the Bolt was thinner, and it was in the bag in spotted form!I applied screw lock agent and installed it, ...Lee mas - Encaja:
- SUZUKI GSX1400 01-07
It is saved because it is cheaper than OEM's Rear suspension. I'm licking GSX 1400 Rear suspension 1 pc \ 83000 -. OEM is also fairly good honesty but I feel like I have one flower in Motorcyc...Lee mas - Encaja:
- SUZUKI GSX1400
Tolle und qualitativ hochwertige Rastenanlage.Gute Verarbeitung beziehungsweise passgenau.Es wäre aber gut wenn man die Rastenanlage in den verschiedensten Eloxalfarben bekäme.
Great and high quality...Lee mas - Encaja:
- SUZUKI Bandit 1250S 07-08
- SUZUKI Bandit 1250 07-08
- SUZUKI Bandit 1200S 06
- SUZUKI Bandit 1200 06
- SUZUKI GSX1400 01-08
- ...y más.
The footpegs are solidly built, look good and feel great to ride with. They allow for slightly more lean angle due to the lack of sliders underneath the pegs. However, one of the pegs comes loose over...Lee mas - Encaja:
- HONDA CB1000 SF (Big One) 92-97 SC30
- HONDA CB1300 SF 98-02 SC40
- HONDA CB1300 SF 03-08 SC54
- HONDA CB1300SUPER BOLDOR 03-08 SC54
- HONDA CB400SF 99-08 V Revo NC39
- ...y más.
Previously, I turned on with CB 750I lost footpeg of CB 1300 this time - -The OEM is crisp and high. (Large pattern)This Manufacturer is also good in quality and good looking. It is cheap.Good product...Lee mas - Encaja:
- SUZUKI Bandit 1250S 07-08
- SUZUKI Bandit 1250 07-08
- SUZUKI Bandit 1200S 06
- SUZUKI Bandit 1200 06
- SUZUKI GSX1400 01-08
- ...y más.
Easily change from OEM's extreme footpeg to Race ish Image.Basically, just remove the OEM and just replace it.When removing the OEM, it is OK so as not to skip the spring.Since angle adjustment is...Lee mas - Encaja:
- HONDA CB1000 SF (Big One) 92-97 SC30
- HONDA CB1300 SF 98-02 SC40
- HONDA CB1300 SF 03-08 SC54
- HONDA CB1300SUPER BOLDOR 03-08 SC54
- HONDA CB400SF 99-08 V Revo NC39
- ...y más.
I bent the Normal step and checked the OEM Parts Number, so it was quite a good priceIf you look for Wae Big, get to this item, Standard Type and Wide (Wide) TypeI bought two kinds.Quantity : Even if ...Lee mas - Encaja:
- SUZUKI Bandit 1250S 07-08
- SUZUKI Bandit 1250 07-08
- SUZUKI Bandit 1200S 06
- SUZUKI Bandit 1200 06
- SUZUKI GSX1400 01-08
- ...y más.
I stole it and folded footpeg and bought it.. Even amateurs themselves could install them relatively easily. Split Pin is also attached.. It is good without rattling. The position of footpeg can also ...Lee mas - Encaja:
- SUZUKI Bandit 1250S 07-08
- SUZUKI Bandit 1250 07-08
- SUZUKI Bandit 1200S 06
- SUZUKI Bandit 1200 06
- SUZUKI GSX1400 01-08
- ...y más.
NORMAL was thick and replaced by Shibui.It is exchanging other than Spring by removing NORMAL. Because there are holes in some places Position can be changed subtly? I made it to the position as it is...Lee mas
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING